Here are all 4 of the Warning lamp cards for Level 1 and L2 clusters VN VP VR & VS
The VN units in a VP make all sorts of horrible combinations - nothing works
The VR VS units are mainly the Sat Belt warning replaces the Press Remote.
White 05 V6 VZ Executive - Thrashed Ex Telstra car
and 3 Dangerous non ABS VN's
Here is a better photo.
White 05 V6 VZ Executive - Thrashed Ex Telstra car
and 3 Dangerous non ABS VN's
Got a pic showing all clusters and all models (obviously your only missing lvl 3 atm.). Good post though.
Hmmmm I have always wondered why the VN dashs had two of the "PWR" symbol....
ah, now I see, you know I just went to the trouble to put the vr gauges inside the working vp cluster just to get those lights right, now i will have to change them back to get that last annoying light to come up.
thanks
Here are the Level 3 diffussers. (the first is from a Toyota cluster) I'll check a VN Holden unit to see if it's any different.
White 05 V6 VZ Executive - Thrashed Ex Telstra car
and 3 Dangerous non ABS VN's
hey 88GreenVN,
sorry to steal your thread.
i put a vn cluster in my vp and left indicator doesnt light up on the dash. do you know which wires need to be swapped around to get it working and on which plug? cheers
George
White 05 V6 VZ Executive - Thrashed Ex Telstra car
and 3 Dangerous non ABS VN's
Hey, dont want to intrude on your thread but i have a quick question.
Today i got a light come up on the cluster, it looks something like this (!) with a circle around it. what does that mean?
Thanks, Terry.
check light do a code test to see what is playing up see how to,s for codes
its a break fail light, if you've updated to a calais dash like me it could possibly be a check engine light ( mine shows up as break fail )
Officially In The SunRoof Crew
'05 VZ Berlina September '09 - April '11
Very interesting, when i brake it goes away, when i let go of the brake it comes back on.
If i change the pads will it go away? Or is there something serious going on?
I'd check all the eaths on the tail lights first - give all the wires at the back of the globes a good wriggle when on and off the brakes - see if any flicker. Also I'm guessing you have checked all the globes by now and are working correctly as far as you can tell. The wriggle test may show up a bad earth.
White 05 V6 VZ Executive - Thrashed Ex Telstra car
and 3 Dangerous non ABS VN's
sorry for this thread dig, but i have a light coming up on my vs, it goes away when i break, it is the light in between abs and check engine, ( post number two, bottom left hand side, second from the left) that light is coming up. Is that just a globe problem?
I had my number plate lights disconnected. Their plugged back in now, hopefully that has fixed the problem. I still have no reverse lights but im getting there