Results 1 to 6 of 6

Thread: Vn calais Auto Not working.

  1. #1
    Ride
    VN calais v6

    Join Date
    May 2009
    Location
    Melbourne
    Posts
    10

    Default Vn calais Auto Not working.

    HI guys.
    I have a 1989 Vn Calais with turbo 700 transmission.
    Here are the problems.
    On initial starting it will take a couple of minuets to kick into either first of reverse. after that it drives and shifts fine.
    In the last couple of days It also began playing up at the lights. The car won't accelerate above a snails pace until it gets above about 15 km/h then drives fine again the engine almost stalls regardless of throttle position. I am thinking that maybe it isn't kicking back into first to cause this.
    Reverse is also affected and the car does not want to do it.
    I am hoping that there is a relatively minor part or something that needs to be changed so that I don't have to do a full rebuild.
    Any suggestions are appreciated.
    Thanks
    Steve

  2. #2
    Ride
    vs commodore

    Join Date
    Oct 2009
    Location
    Tamworth NSW
    Posts
    4,505

    Default

    Has the transmission had a filter and fluid change at all lately?Id try replacing the trans filter,and new fluid and then see how it goes.Id also check for any error codes,if you dont know how to do this simple,easy test,have a look at the posts in this link.
    ---Checking your Computer for Faults (VN - VP)---

  3. #3
    Ride
    VN calais v6

    Join Date
    May 2009
    Location
    Melbourne
    Posts
    10

    Default

    No it hasn't so I will give that a shot first.
    When I bought the car some years ago it was not changing into first as I described. I took it and got is serviced but that made no difference.

  4. #4
    Ride
    VN calais v6

    Join Date
    May 2009
    Location
    Melbourne
    Posts
    10

    Default

    Just took it for a drive to warm it up. Took 2 mins after putting it into drive for it to kick in. drove ok around the block. Pulled up at home and reverse worked ok, was slow to kick in again but worked fine. I was able to manually shift down through all gears and each kicked in fine. Got it home and checked the tranny fluid. Looks fine, nice and red not murky and no burn smell or look. It was also filled to the correct level. I am thinking it has to be something more sinister going wrong and maybe only when it is hot?

  5. #5
    Ride
    89 VN 5lt

    Join Date
    Mar 2005
    Location
    Busselton W/A
    Posts
    212

  6. #6
    Ride
    VN calais v6

    Join Date
    May 2009
    Location
    Melbourne
    Posts
    10

    Default

    never thought about that, I will investigate ASAP.
    Thanks

Similar Threads

  1. Auto lights off has stopped working
    By michaelw in forum VT - VX Holden Commodore (1997 - 2002)
    Replies: 2
    Last Post: 28-09-2009, 06:57 PM
  2. Reversing lights not working on V6 auto....help??
    By 6L SSV Writeoff in forum VR - VS Holden Commodore (1993 - 1997)
    Replies: 4
    Last Post: 11-06-2009, 08:20 PM
  3. VL Auto Powershift stopped working?
    By I drive a VL Commodore in forum VL Holden Commodore (1986 - 1988)
    Replies: 11
    Last Post: 19-02-2009, 07:15 PM
  4. Auto gear position light not working
    By apdownie in forum VY Holden Commodore (2002 - 2004)
    Replies: 7
    Last Post: 04-09-2008, 10:17 AM
  5. Auto Trans not working as it should!
    By holden007 in forum VR - VS Holden Commodore (1993 - 1997)
    Replies: 22
    Last Post: 29-11-2006, 05:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72