Results 1 to 10 of 10

Thread: VN wheel allignment weird

  1. #1
    Ride
    VN II Berlina

    Join Date
    Apr 2009
    Posts
    125

    Default VN wheel allignment weird

    Just got back from thailand today after 10 days, the day before i went i drove my car, all was good.

    No-one drove it under specific orders while i was away, my mum just back it out a meter and then drove it back in because the house is being painted.

    Today i get in my car and suddenly what used to be a pretty good wheel alignment is absolutely way off. steering wheel almost half turned=wheels pointing straight.

    I don't see how this is possible without the car being driven? is it? i also went around a corner a little quick today and the front tires seemed to over steer, the front of the car pulled left, the way in which the steering wheel is now naturally turning (anticlockwise), there was a bit of screeching aswell, but the speed i was going was nothing out of the ordinary.

    (my mum stresses that no-one drove the car, and all she did was reverse and forward, didn't even turn the steering wheel, no pot holes etc.)

    I might just be looking too hard now but it also seems like one of the front wheels is on an angle eg. like a supercar.

    I had a quick look underneath just now with a torch but way too late to jack it up as i have uni tomorrow.

    Any ideas or does this all sound bloody crazy?

  2. #2
    Ride
    01 VU SS UTE

    Join Date
    May 2005
    Location
    Moree
    Posts
    213

  3. #3
    Ride
    VTII Calais International, VL Wagon

    Join Date
    Feb 2005
    Location
    Canberra
    Posts
    39

    Default

    something like this doesnt just happen with it sitting there. someone has to have driven it.

  4. #4
    Ride
    VN II Berlina

    Join Date
    Apr 2009
    Posts
    125

    Default

    Quote Originally Posted by vl_nick View Post
    something like this doesnt just happen with it sitting there. someone has to have driven it.
    yer i know, just doesnt make sense.

    And nah definitely not tire pressure

  5. #5
    Ride
    vs commodore

    Join Date
    Oct 2009
    Location
    Tamworth NSW
    Posts
    4,505

    Default

    Whos painting your house,and is your mum there all day with them.Maybe they have been swapping parts over from your car if no ones there..If not,then it has to have been driven,Id sus out the painters,your mum might have given them the keys to hang onto so they could move it out of the driveway when they needed to,then maybe they decided to go get smoko in it and hit a gutter.Is there any scuff marks on the tyre walls?

  6. #6
    Ride
    VN II Berlina

    Join Date
    Apr 2009
    Posts
    125

    Default

    Quote Originally Posted by Brett_jjj View Post
    Whos painting your house,and is your mum there all day with them.Maybe they have been swapping parts over from your car if no ones there..If not,then it has to have been driven,Id sus out the painters,your mum might have given them the keys to hang onto so they could move it out of the driveway when they needed to,then maybe they decided to go get smoko in it and hit a gutter.Is there any scuff marks on the tyre walls?
    nope, my uncle was painting the house, and i did check for gutter rash in the rare situation someone stole it for the night and then put it back in its place afterwards.

  7. #7
    Ride
    VN II Berlina

    Join Date
    Apr 2009
    Posts
    125

    Default

    PROBLEM SOLVED!

    well not solved, but diagnosed at least.

    finished uni early today so jacked her up, had a bit of an inspection, turned the wheels back n forth.

    VERY shocked to find the bolt holding the lower control arm in place had fallen out to the point where it wasn't poking through the other side. And to think i drove it about 30k's like that scares me.

    No sign of the nut in my driveway anywhere so it's off on a 1 hr drive to the wreckers to get a bloody nut, unless someone has one lying around near wantirna south in VIC?

  8. #8
    Warranty Void's Avatar
    Warranty Void is offline Take it apart? Me? No!
    Ride
    VP Berlina LX V8

    Join Date
    Sep 2009
    Location
    Melbourne
    Posts
    432

    Default

    Dude if you're at Wantirna Sth then go see the Commodore frenzy boys at Kalman Drive Boronia that can't be more than 10 minutes away (9729 8126)
    I'd be surprised if they wanted anything for the nut. They only do Commo's, they know what they're talking about and have taken great care of my VP Berlina V8. I don't bother going anywhere else now.
    Tell them Warranty Void sent you if you want, cant hurt.
    Last edited by Warranty Void; 09-03-2011 at 09:46 PM. Reason: stipid
    Warranty Void

  9. #9
    Ride
    VN II Berlina

    Join Date
    Apr 2009
    Posts
    125

    Default

    Quote Originally Posted by Warranty Void View Post
    Dude if you're at Wantirna Sth then go see the Commodore frenzy boys at Kalman Drive Boronia that can't be more than 10 minutes away (9729 8126)
    I'd be surprised if they wanted anything for the nut. They only do Commo's, they know what they're talking about and have taken great care of my VP Berlina V8. I don't bother going anywhere else now.
    Tell them Warranty Void sent you if you want, cant hurt.
    Done and done, thanks warranty void.

    They didn't charge me for the bolt and definitely have my business from now on. Next on the list to look for a is a vn ss lip kit which are bloody impossible to find lol

  10. #10
    Ride
    VT Series 1 Berlina Wagon

    Join Date
    May 2010
    Location
    Croydon, Vic
    Posts
    157

    Default

    If commodore frenzy cant for some reason help you in the future you have a commodore wrecker in FTG, one in kilsyth and pick a part in kilsyth too mate all less than 15mins drive from there

Similar Threads

  1. weird creaking noise through steering wheel
    By jimbojones889 in forum VR - VS Holden Commodore (1993 - 1997)
    Replies: 6
    Last Post: 24-11-2010, 06:44 PM
  2. Steering wheel making a weird noise
    By JSTCOZ in forum VR - VS Holden Commodore (1993 - 1997)
    Replies: 5
    Last Post: 15-04-2010, 12:21 AM
  3. front radius rod bushes, 4 wheel allignment
    By Harrison in forum VY Holden Commodore (2002 - 2004)
    Replies: 6
    Last Post: 20-12-2009, 11:03 PM
  4. Front wheel allignment, which items to replace?
    By bozz73 in forum VT - VX Holden Commodore (1997 - 2002)
    Replies: 6
    Last Post: 23-10-2009, 08:30 PM
  5. Bonnet Allignment
    By ChRiDDa in forum VR - VS Holden Commodore (1993 - 1997)
    Replies: 3
    Last Post: 21-11-2005, 12:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72