Results 1 to 7 of 7

Thread: V8 temp

  1. #1
    Ride
    vn calais 5.0

    Join Date
    Jun 2011
    Location
    victoria
    Posts
    604

    Default V8 temp

    I replaced the thermostat and flushed the motor and radiator and put new coolant in and was wondering what temp should it be running at on the temp guage? Mine sits about 1/3... Is that about right for a vn 5ltr? When should the thermo fan come on as well?

  2. #2
    Ride
    VP Commodore SS 1992

    Join Date
    May 2011
    Location
    Auckland NZ
    Posts
    77

    Default

    what temp thermo did you use ? Standard they are 88 degrees. Fan comes on at 100. When thermostats are old they dont open as well. You should always test in a pot of boiling water and they should come on before it boils at 100 degrees. Mine sits just above 1/4 with a 88 thermo.

  3. #3
    Ride
    vn calais 5.0

    Join Date
    Jun 2011
    Location
    victoria
    Posts
    604

    Default

    Not sure on the temp for the new thermostat.. Will have to find the packet that it came in.. What the best way to tell the temp when the fan comes on..Can I change the temp on the fan as well?

  4. #4
    Ride
    VP Commodore SS 1992

    Join Date
    May 2011
    Location
    Auckland NZ
    Posts
    77

    Default

    If you can hack the ecu you can change the temp. But you shouldnt need to if everything is ok, its only really a back up to the main fan. Only way to tell the temp in your car is when it actually comes on. Mine cant come on as the fan was jammed the only way I knew it tried to come on was a blown fuse , haha. Now I dont have a electronic fan at all. I have an aluminum radiator tho and its winter in nz so will just fix it before next summer just in case it wants to blow another fuse :-)

  5. #5
    Ride
    vn calais 5.0

    Join Date
    Jun 2011
    Location
    victoria
    Posts
    604

    Default

    It's winter here too.. Might have to see if I can get the fan to work ad see if it runs but when I let it run in the Drive way it does not get past a 1/3 and runs fine..

  6. #6
    ucwepn's Avatar
    ucwepn is offline America just kicked in yo
    Ride
    WH statesman 5.7

    Join Date
    May 2005
    Location
    Melbourne
    Posts
    2,420

  7. #7
    Ride
    vn calais 5.0

    Join Date
    Jun 2011
    Location
    victoria
    Posts
    604

    Default

    Cool thanks for the help guys..

Similar Threads

  1. oil temp/water temp gauge wiring
    By HUMBLZ in forum VZ Holden Commodore (2004 - 2006)
    Replies: 6
    Last Post: 26-05-2011, 04:53 PM
  2. temp flashes hot and then goes bak to normal temp?
    By shifty_90 in forum VT - VX Holden Commodore (1997 - 2002)
    Replies: 20
    Last Post: 19-10-2009, 09:50 PM
  3. normal running temp for a VT 5L? and temp gauge..
    By mike49 in forum VT - VX Holden Commodore (1997 - 2002)
    Replies: 1
    Last Post: 19-08-2009, 12:57 AM
  4. Q's regarding Coolant Temp & Intake air temp sensor
    By Steven M in forum VT - VX Holden Commodore (1997 - 2002)
    Replies: 4
    Last Post: 03-02-2009, 05:08 PM
  5. Electric oil temp and water temp gauges
    By FRESH_VR in forum General
    Replies: 4
    Last Post: 02-09-2008, 04:27 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72