How The **** Do I Get These Off!!!

[3.8L of executive power!!]

just wondering how the heck you get the window winders off the vn executive interior, ive tried but failed,

[1vngal]

I think there is a metal pin between the winder and the door skin. They are an absolute b*tch to get off though.

[AirStrike]

There is a horse shoe shapped clip holding them on. I normally just use a flat head screw driver to clip it off. Make sure you put a rag over the winder tho, as they have a habbit of flying off at a hundred miles an hour.
AirStrike

[jack.mc]

yep, i used a really skinny, stiff wire, with a kink in the end. I was able to just push it off. In the past I made a tool that looked like this

[ProMaX]

hey thats a good idea jack mac

I just used to flathead screwdrivers, one on each of the horse shoe shaped clip and was very very patient

[jack.mc]

yeah it worked awesome. That was when dad and i were doing the EH... then we lost it.. But it got 'em off first time, every time!!

[hakhawk]

autobarn or supercheap(i think) have them, cost like $7 or 8, easy to use.

[samuels]

hey thats a good idea jack mac

I just used to flathead screwdrivers, one on each of the horse shoe shaped clip and was very very patient

that tool has been around for years...you can just make one up out of 2mm thick mild steel....

[LindasBT1]

I just use a piece of rag jean materal put it in between and slide it back and forth works every time

[jack.mc]

me made ours out of a paint scraper i think

[Emackulation]

I used tweasers......hehehe.

[MasterOfReality]

Use the rag trick as mentioned by LindasBT1.

[DavidPartay]

Yep, rag trick works quickly and easily and every time.

I can take a door trim off in about 2 minutes thanks to the rag