Hi,
My VP berlina has just started getting a shudder/vibration from the rear end only when accelerating from standing start. It only lasts for a few seconds or so. Could this be the tailshaft causing this.
Thanks
mate i had the exact same problem up untill last week. Went to mechanic who put in new front and rear universal joints. Fixed the problem up straight away. If its not ur uni joints (which probly could do replacing anyway) then at least u can suss out the diff while your at it![]()
yeh thats moss likely what it will be is the uni's or centre bearing,
THERE IS NO REPLACEMENT FOR DISPLACEMENT
Just done my tail-shaft no vibration unbalanced feelings anymore under any driving![]()
Originally Posted by Yoda
Thanks for the replys. Much appreciated.
Apart from the Uni joints - try doing all notholane bushes throughout. I had same issues got new Upper/Lowing trailing arms and its all sorted.
Chris.
i have a prob where after i start my car, is vibrates and when i put it into gear it like jerks.
wat could be the cause of this?
VS SS - Street/Show Project [BEEFY]
http://forums.justcommodores.com.au/...-beefy-v2.htmlHID Kits from $100 - Installation available PM FOR DETAILS
Myn was similar to your going into gear, It still is a touch I'm was told i had play in the tail-shaft, Fixed that it's still there but a little clonk further back now, I'm now told i have play in the diff.Originally Posted by beefcream
But after i had the tranny done it jumped forward going into gear pretty hard went back and the guy adjusted the kick down cable that helped a little.
You just might have some extra play in there i might be 100% wrong![]()
Originally Posted by Yoda
Try the flex joint if its not the uni joint, its right neer the uni joint. things that may cause it to be the flex joint is a poorly supported gearbox and worn suspension.
ill get it checked out when i get a tranny service
VS SS - Street/Show Project [BEEFY]
http://forums.justcommodores.com.au/...-beefy-v2.htmlHID Kits from $100 - Installation available PM FOR DETAILS
Uni Joints, rear control arms,tail shaft,diffs...
Abviously something in the drive train so work with that list 1st dude and ull sort it out.
Cheers.![]()
* RVN 355 *
This is a common problem, I believe that you need to add an additive into your diff cone's. They polish and start to slip, feels really bad in the car. If this is the problem and you leave it to long then you maybe up for a rebuild. No need to panic, you have the good fortune of driving a holden so the additive should be suficiant. Cheers.