Au Thermofan & Craig Davies Electric Waterpump Upgrade For Vn Ss

[RVN 355]

Hey fellas, water pump went today on my vn ss ,noticed it when i did my oil change

what do u think of an upgrade to the electric type or just get a generic waterpump

CRAIG DAVIES EWP 100

Craig Davies ewp110 (dc-8015). the same great reliabilty as its smaller brother but with a flow rate of up to 110ltrs/min. release engine horsepower and reduce temp for a very minimal cost
Price: $249.00

http://www.tuffcarparts.com/store/vi...uct=DAV0YIFA17


AU TWIN THERMO'S
Has any one on jc done au thermo fan upgrade to there v8 304? worth the money?

AU thermofans with a little plastic surgery they can be made to fit just about any vehicle. a whopping 3000cfm is pumped from these babies. approx size is 660/600/100mm
Price: $185.00

http://www.tuffcarparts.com/store/vi...t=AU%20FPLZW17


Thanks guys

[253@7k]

Sounds good mate, Ive seen an alloy radiator with twin AU's setup on a 308 with the 100Lph craig davies w/pump. The setup worked well but at higher RPM

the engine got very hot, in the end he changed to a different w/pump )cannot for the life of me think what it was though.)

I have heard nothing but good things about the C.D w/pumps (exception being the 308)so I would say go for it.

As for the thermo fans, can you ever go wrong with them? The 304's keep reasonably cool IMO, but cooler will never hurt.

Good luck with it.

Steve.

[RVN 355]

thanks slundy, duno if u have seen my ride but it runs @ half on my power glo 2" guage so it aint too bad. these 2 were just ideas i thought to do as it has to be better than a stock item and a good investment

[253@7k]

Just had a look at ur "my ride" section and thats one bloody nice ss mate. Very clean indeed. You should get a few more kw out of the elec w/pump and you

should be able to get both items for around $400 in total. Plus once you've done that it will be one thing out of the way if you go chasing more power.

[RVN 355]

do you recond this will be an expensive conversion,any ecu mods or such?

Thanks for checking out my ride hope ya like it. thanks

[253@7k]

Shouldnt need tuning but I am not too sure in that department. Fans maybe?

I only do mechanical I am not technoligicaly up to date.

As far as I know it will just be bolt on and go. (might need an adapter for where waterpump was?)

Hope I answered Q's insted of posing more.

[AirStrike]

Shouldnt need tuning but I am not too sure in that department. Fans maybe?

I only do mechanical I am not technoligicaly up to date.

As far as I know it will just be bolt on and go. (might need an adapter for where waterpump was?)

Hope I answered Q's insted of posing more.

Thermos can either be wired to a switch or to the ecu and be controlled that way. Water pump best bet is to get the temp controller from davies craig.
http://users.bigpond.net.au/jimbo123/VN/
Subdue look at this page, click on mods up the top then on installing VT twin thermos. AU's are the same but less trimming for the top and bottom radiator hoses.
AirStrike

[RVN 355]

that was very handy indeed, thank you airstrike, massive job for the vt twin thermo's kinda make me think twice.... ill have a chat to my auto elec and show him that website. cheers once again ur a champ

[RVN 355]

Air Strike i also seen one of ur previous posts, do you have any more info or website where you go this from?

(Part Number: DC-685) Davies Craig Trans Cooler (hydra Cool)
19mm thick, 280mm length, 176mm height, 146mm core,GM VN-VS, 5/16 in. fitting size
$139.95

(Part Number: DC-0401) Davies Craig Mechanical Thermal Switch
Adjusts at what temperature the thermatic fan turns on
$45.95

(Part Number: DC-0045) Davies Craig Thematic Fan
10 inch Fan Kit (Black)
$89.95

[AirStrike]

Air Strike i also seen one of ur previous posts, do you have any more info or website where you go this from?

(Part Number: DC-685) Davies Craig Trans Cooler (hydra Cool)
19mm thick, 280mm length, 176mm height, 146mm core,GM VN-VS, 5/16 in. fitting size
$139.95

(Part Number: DC-0401) Davies Craig Mechanical Thermal Switch
Adjusts at what temperature the thermatic fan turns on
$45.95

(Part Number: DC-0045) Davies Craig Thematic Fan
10 inch Fan Kit (Black)
$89.95

Wheres that from? Must be from ages ago as I cant remember it.
AirStrike

[RVN 355]

this will be a big job, ill ring up for a stock item on tuesday 12.june 06 to get a price and compare

[foammedia]

The AU fans with VT fan bolts is the way most people go, there are excellent how-to's on everyones second favorite forum