CRS charger install

[VNV6VENGEANCE]

Not happy , just got my sc14 with crs kit from ebay yesterday. Tried to fit the charger completely with no instructions as none were sent to me. I have been having trouble with the exact locations of one of the brackets and am unsure of all of the hose locations.

Has anyone who has purchased the crs kits for the vn/vp still got their instructions. If so it would be really good if someone could post a guide to the charger install. I have searched the forums and have come up with no guides or diagrams. Pleas help people, i'm not paying a mechanic...

[jack.mc]

Someone did post up a scanned copy of the CRS instructions, but I have no idea where

[VNV6VENGEANCE]

Yeah well i have found two of the hose locations from the guy i bought it off but am still unsure of where the exhaust bracket and where the bottom of the triangle bracket bolts into. This is very very confusiong without instructions.

[VNV6VENGEANCE]

If someone has the crs instructions would it be possible for them to scan the pages and pm or email them to me. Any help is much appreciated.

Could u buya set of instructions from crs?

[ashzv6]

hi

dont buy a set of instructions its easy to install
is it a buick or a ecotech?

i have ecotech instructions but i dont know how to post pics
tell me and i will post. but honestly its easier without

i did my own kit and tested it today,i need to remake the brackets as the were flexing a fair bit, it is noisy as! with no piping it sounds like a rotary
at like full throttle

the triangle bracket goes from the bolt coming out of the right of the coil pack bracket and the bolt right of the water pump, note: u must move your coil pack bracket and grind it up so you can fit the triangle bracket

than on the passanger side from the front undo the second and third bolt of the headers. then mount the bracket on the header bolts.

i did mine similar but i still need another bracket at the back so it doesnt move
hope that helped.

[VNV6VENGEANCE]

it is a buick. I am not machining any of the pipes, crs have done all of the welding, piping etc. cheers for that exhaust bracket location. I will pull the charger off and have a good look tommoro. i will keep you psoted

[ashzv6]

make sure you let us all know your progress

ive nearly finished my kit,
ive gotta wait till monday so i can get some heavy steel so i can redo my brackets, i mounted my idler and tested it yesterday, i couldnt find any where to make me an idler so i made my own from a v6 idler bracket grinded down alot. than i mounted it from the bottom thread on the coil bracket

theres so much vacuum getting sucked through the intake, i nearly lost my hand, lol
i will be able to mount my kit on monday and go get some pipinng done

And if u need help with anything i can probobly help.
i nearly know how to install it with my eyes closed!

[VNV6VENGEANCE]

all done i have been going for little drives since i don't have my license at the moment. I am waiting for my tax so i can get a custom tune and chip made so she chirps. it does pretty well for itself now tho..dragged off my mates vp 5.0ltr