Vn wont rev

[wilca014]

I was coming home the other day when my 1990 vn commodore died it took a while but i finally got it restarted, but i cannot get any revs out of the car, when you put your foot on the acclerator pedal it stalls.

Before: it stalled every know and then the car would die in revs and then surge.

Cheers
Colin

[dodgy]

Crank Angle Sensor or Coil Pack
Most likely the first

[beefcream]

very likley coil pack just dying.. i had this same prob

[mouce]

Check the fuel pump too.

[calais_cruzin]

yeah mine did tha samething, did the crank angle sensor first but it was the fuel pump.....my pump wouldnt hold pressure once the car was turned off n loose pressure after 25-30 min of drivin.....stop the car n restart it n it was fine for another couple kms...

[vn88calais]

Crank Angle Sensor or Coil Pack
Most likely the first

nah man crank angle sensor aint like that...the crank angle sensor works fine once u chuck water on it, wont kill it when u start it and put foot on accelerator cable...good guess tho, id say probably the coil pack...

but definatley not crank angle sensor...

cheers, Todd

[wilca014]

Cheers thanks for your help it was the fuel pump in the end.

Cheers
colin

[commy92]

My vp has just done this. You recon fuel pump.. FAR OUT... why didnt i keep that spare i had. grrrr whats a new fuel pump worth.

[commy92]

ok i worked my prob out. I ran out of fuel.. lol chucked the mower fuel in and went and put $30 in.. raped it for a bit.. and bobs ya uncle. all better now

[VN-SV-89-LE]

where is the crank angle sensor located on a VN?

[PaRaDoX]

where is the crank angle sensor located on a VN?

underneath the harmonic balancer,

i think u have to remove it to get at it, standing from infront of the engine its to the right under the harmonic balancer, you'll see the wires

as for fuel pump yeah sounds about right