Results 1 to 5 of 5

Thread: Lsd

  1. #1
    Viper01's Avatar
    Viper01 is offline H8TRED
    Ride
    vp executive 3.8L

    Join Date
    Jun 2006
    Location
    central coast, toukley
    Posts
    11

    Default Lsd

    hi guys
    i've got a vp and im pretty sure that it has an lsd but it somtimes wont spin doubles. do you's have any ideas?
    P.S. any preformance mods would be helpful.

  2. #2
    Morton's Avatar
    Morton is offline For external use only
    Ride
    Fairstar the Funship

    Join Date
    May 2006
    Location
    Melbourne
    Posts
    3,976

    Default

    It could be a busted LSD. Which wheel lights up in drive, left or right rear?
    __________________________________________________

    The 1972 HQ Kingswood

    The 1989 VN Turbo Rally Project
    __________________________________________________


  3. #3
    Viper01's Avatar
    Viper01 is offline H8TRED
    Ride
    vp executive 3.8L

    Join Date
    Jun 2006
    Location
    central coast, toukley
    Posts
    11

    Default

    the right one but sometimes the both light up. i used to be able spin doubles all the time.

  4. #4
    Ride
    2004 Black Vz R8 HSV Clubsport 297kw Gen IV M6

    Join Date
    Apr 2006
    Location
    South australia , Adelaide
    Posts
    565

    Default

    depends on the road too, i span doubles a few times and i dont have a LSD, if the ground is even/flat both shuld spin, but if one side is lower then the other well then yea only one spins
    =Brock=
    My Ride
    2004 Phantom Black Vz R8 Hsv Clubsport 297kw 6L Gen IV M6-6 speed, Full black leather -

  5. #5
    immortality's Avatar
    immortality is offline crappy ol' VN driver
    Ride
    VN3.8 5spd/VSII3.8/VH5.0

    Join Date
    Apr 2006
    Location
    Auckland NZ
    Posts
    6,808

    Default

    do a simple check to confirm the LSD, jack up one rear tyre(leaving the other tyre on the ground), ifyou can turn it by hand without much force it's not an lsd( handbrake off, chock front wheels -safety disclaimer) or the lsd is busted/worn out. according to the gregories manual it should take a minimum of 68nm of torque to make the LSD slip. if this test fails the only other method is to remove the cover ofthe diff and identify which you have but you would need to know what your looking at except to say theirs more bits in the centre of the LSD diff head

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71