Hey guys,
Yesterday i went to pull the bonnet cable and snaped it some how, now what im wondering is how do i get the bloody thing open now the cable has snaped?
cheers scott
There's a couple of threads on this. I think if you can get the grille off, you can activate the latch manually with a screwdriver. Is it snapped at the lever end, or the bonnet end? If it's just broken out of your lever, you can probably grab the cable with a set of plyers and tug while someone holds the front of the bonnet down. Chances are the cable hasn't actually broken, and has just come loose at one end.
I should really read up on this in more detail, 'cause my cable's about a foot longer than stock. I figure it's got about a month left in it.![]()
__________________________________________________
The 1972 HQ Kingswood
The 1989 VN Turbo Rally Project
__________________________________________________
its still attached at the handle end so im guessin it it the bonnet end thats come loose/snaped
is the cable actally snapped? is the lever totally loose and floppy or it just won't release the bonnet?
if it feels like theres something there still, try getting someone to apply pressure on the front of the bonnet as you pull on the release.
if its snapped, and if your willing to sacrifice your front grill you can pull it out, its got three screw at the top and three plastic legs which go into the bar, you will be able to get to the latch part. when you remove the grill, looking upwards through the hole,there will be a hole in the centre of the strengthener/ where the bonnet locks to, you should be able to get a flat blade screw driver in there and unscrew the latch part that sits on the bonnet itself, it will taak a bit of effort to undo because there is a lock nut which sits close to the bonnet which you won't be able to undo first.
another option would be to take it to a smash repairers and see if they got any ideas.
Soon to be back on the road, Turbo VG.
this isl ike my bonnet, to open her up, its a tow man shop, sumone has to push the bonnet down, and the other person keeps pulling the handle to open it from the driver side. liek the cable is stretched on mine
Al3x
Mines just faster cos its Red
nar is deffently snaped coz its dangelling down near the kick pannle so yer, and i got the grill out with out snapping the leg things wich was a bonusdont ask me how i dont it coz i have no idea lol
but thanx for you help guys![]()
Originally Posted by plAythiNG
Same here![]()
If Your In S.A (Adelaide) And Have VR/S Parts & VL Parts For Sale
Go Here ---> http://forums.justcommodores.com.au/...tml#post683835
where bouts in melb are ya man???Originally Posted by VN-SV-89-LE
i had the same thing happen to me, i could help ya get it open
u should beable to remove the screws on the grill from under the bumper for the legs
and just remove the screws on the top with a thin screwdriver
from there u gotta jack the latch, its complicated and a genuine pain in the ass
i had to push down on mine a few times when it wouldnt get open...but now it works perfectly....
anyone got an explanation for that coz i sure dont...lol
when this happened to a friend of mine he unlatched it using a method kind of the same as the ones u guys are saying...ill try and find out what he did.
YOU KNOW WHAT THEY SAY.......WAIT......NO I DONT
Job is so much easier with a torch, you can see the latch that you have to push towards the drivers side of the car.. Takes seconds..
Cheers, Gaz