Hey..
Obviously i know alot is defectable
Just wondering what are some things that people have been picked in when going thru the pits ( vehicle inspection, Regency)
This way i can check over mine and replace to hopefully make the inspector happy![]()
Anything little will help
Thanks![]()
If Your In S.A (Adelaide) And Have VR/S Parts & VL Parts For Sale
Go Here ---> http://forums.justcommodores.com.au/...tml#post683835
My defects:
Sports Steering Wheel And Boss Kit x 2
Standard Steering Wheel had slack in outer cover
Faded Tail Light
Reflectors did not reflect enough (wtf)
Too Low (330mm front, 305mm rear is legal)
Window Tint too dark (70% front, 35% rear is legal with no more than 10% reflectiveness)
'Strobe Light' on dash (shift light on tacho)
Blue headlights
I think there were some more but I dont remember all of them.
They put your car on the hoist and inspect it pretty thoroughly, engine bay, tyres, wheels, rear lights, suspension etc. They put it on the rollers and test your brakes. They test your window tint and all your lights.
Its like a 45 minute appointment so they are pretty thorough. They do interior as well.
Sports Steering Wheel And Boss Kit x 2
Standard Steering Wheel had slack in outer cover
Faded Tail Light
Reflectors did not reflect enough (wtf)
You talkin about the reflectors on the actual lights...
hmm so i should put a stocko vn steerin wheel on then aye
If Your In S.A (Adelaide) And Have VR/S Parts & VL Parts For Sale
Go Here ---> http://forums.justcommodores.com.au/...tml#post683835
Yeah a stock one and make sure its got no slack in the outer cover.
And yeah that was the reflectors on the actual lights... I still say there is no law as to how reflective they have be.. the guy was making shit up!
steam ur engine the day before and check oil leaks cv boots suspension. check all ur lights as vn said check all ur dash lights/switches work, washer jets, handbreak, nothing mounted onto of ur dash. anything little just go rite over ur car urself and ask yourself if i wanted to defect the car wot would i do it for if i was a prick.
had my brother in law take his 180 through we did struts, secured the pod, put stokies on, etc
he got told bout his boost guage but with turbos they let them slide if its mounted low and properly, and sujested he replace the cv boots coz they were just starting to crack and become brittle.
hope this helps
Yeah that helps..
I went over the car a few times checking everything..
but theres always going to be something i wouldnt see or probably even know about to look for.. So i was hoping someone has been ****ed over and can shed some light
If Your In S.A (Adelaide) And Have VR/S Parts & VL Parts For Sale
Go Here ---> http://forums.justcommodores.com.au/...tml#post683835
Do they check stuff like the condition of any suspension bushes and play in wheel bearings? That was always something I was wary of when it came to having my car MOTed in the UK. I had a car fail for excessive play in a wheel bearing once. I hadn't picked up on it as it wasn't noisy, but you can check by jacking the car up and grabbing hold of the top and bottom of a wheel then trying to move it inwards and outwards. Play in balljoints is another thing if they check it.
Whoever said 'There is no substitute for cubes' had obviously never heard of Jet power
Yaeh man they check everything from grommits in the car to seat belts you name it.. its just the things that i totally dont know to look at.. sounds stupid but there will always be 1 thing that ****s you up
If Your In S.A (Adelaide) And Have VR/S Parts & VL Parts For Sale
Go Here ---> http://forums.justcommodores.com.au/...tml#post683835
Yeah, its a pain, but if you check all the bits you know and make sure the major things are right then they should only give you a list of minor issues to sort. Didn't Killa_calais get a good going over from Regency recently?
Whoever said 'There is no substitute for cubes' had obviously never heard of Jet power
they check barings yes but interior they bassically have a suss around pull at shit and make sure seat belts actualy stop and retract.they are very thourou when they look but saying that my car was in for too low and too loud the car was neither measured for either abd it had a power steerring leak so bad i was going throu 2 bottles off fluid a month lol go figure they never picked that
[SIGPIC][/SIGPIC]
yeh my washers didnt work but they didnt put that on the sheet lol adn my demister didnt ****ing vl's lol
[SIGPIC][/SIGPIC]
Yes darren, but your vl is still defected haha
If Your In S.A (Adelaide) And Have VR/S Parts & VL Parts For Sale
Go Here ---> http://forums.justcommodores.com.au/...tml#post683835
guys taking ti to regency on thursday lol he fixed all the problems
[SIGPIC][/SIGPIC]
just a tip:
as we do roadworthy inspections at work ive found a few ways to kind of dodge
leave little things that are easy to spot and easy to fix and some times they miss the big things eg,a light out or not working washers
i done it when i got my boss to look at my car and it seemd to work
Stato on the inside, berlina on the out side,5ltr under the bonnet,stockies all round...........that thing has to be a sleeper
MY RIDES
[SIGPIC][/SIGPIC]
http://forums.justcommodores.com.au/...ad.php?t=41837
man in me old town ya just take it to this dodgy ispector slip him like 150 and ur on the rd again. give it a crack dont take it to a big company they'll go right over it...
haha umm...
hmm..
i know a way for 700 but **** that
If Your In S.A (Adelaide) And Have VR/S Parts & VL Parts For Sale
Go Here ---> http://forums.justcommodores.com.au/...tml#post683835
its all about who you know not what you know isn't it. i know a guy through work that can get me dodgys for about 200 bucks, lol.
Soon to be back on the road, Turbo VG.
haha yeah i know aye ^^
but he wants 700 to clear it ffs i can get it off for less i just cbf goin to regency....
but if it was a twin turbo v8 vn or something then id consider payin 700 but till then im a tight ass![]()
If Your In S.A (Adelaide) And Have VR/S Parts & VL Parts For Sale
Go Here ---> http://forums.justcommodores.com.au/...tml#post683835