Vr engine in Vn mods

[Bz Kn33z]

Hey i am going to put a Vr engine into my Vn commodore
and i was wondering if i did some mods like high ratio roller rockers stage 2 cam twin throttle body, i already have exhaust pod and all the miner things.
but if i did all that and had a tune/chip how many RwKw will i get thanx.

[Burnout_bro]

all depends on who tunes it, what roller rockers you use, and how good nick your motor is in.

[Bz Kn33z]

Well if everything turns out right if the motor is good i think there 1.9 ratio rollers and twin throttles stage 2 cam how many Kwz will i be looking at Roughly

[azkwazere]

Well if everything turns out right if the motor is good i think there 1.9 ratio rollers and twin throttles stage 2 cam how many Kwz will i be looking at Roughly

Who makes the rollers?
Who makes the stage 2?
What capacity is the engine?

good start would be to provide some useful information....

aZk.

[Bz Kn33z]

Not sure on the brands just seen the Twin throttles and roller rockers on ebay they said u can gain up to 15 20kws with the right mods and it said cam exhaust Roller rockers. i will look for the brandz.

[1991_Vn2nV]

Alot of people have actually lost power with the twin throttle body setup and for an engine with few mods, it is completely worthless in my opinion.

Yella Terra would make the rockers as nobody else does for the Buick engine.

[commomate]

should go with yella terra rockers and cam with their custom chip throttle body is good too

[[JUDGE]]

what are the prices on the rollar rockers/twin throttle body/chip/stage 3 cams? curiosity

[1991_Vn2nV]

Rockers around 700, twin throttle body around 1200 but is a complete waste of money. Stage 3 cam and chip around 1200.