Oil pressure sensor

[IhateRICE!]

hey guys

um i have just found that i have oil leaking out from the oil pressure sensor and i would like to know how to change them over. just unscrew it?
and also i think it also leak from my dipstick ( right down the bottom in the sump) how do i replace this?


Cheers

[Morton]

Oil Pressure Switch just screws out with a good shifter. New one won't set you back more than twenty bucks on a bad day. Not sure about the dipstick off the top of my head.

[defa]

i think the dipstick will have an o-ring you can replace.. i think...

[Not_An_Abba_Fan]

Spot on defa, there is an o ring on the bottom of the tube.

[IhateRICE!]

thanks alot guys

just rang up for the sensor set me back $25 bucks which i spose isn't that bad. How do i get to the o ring but will i need to take the dipstick off? if so how do i remove it?


Cheers guys thanks for your help

[Not_An_Abba_Fan]

Not sure if there is a bracket holding the tube to the engine, usually about 1/2 way up or it may even be on the base of the tube, once you have undone it, just pull it up.

[Bz Kn33z]

Just undo the bolt holding the bracket of the dip stick, then pull it out the O-ring will just slip off so just take the O-ring up to a place like Bursons or sprint wont be much could even get it from a rubber joint (clark Runbber)