help needed urgently RE imobilizer

[zumanity]

hey guys i have a 92 vp lexen / commodore and it has the button clicker for the imobilzer. the trouble is its started to play up and the key switch on the passenger side front that bypasses it has been drilled out by the last owner.

is there any way that i can bypass the imobilizer permanently?

[pow3rslave]

so when you say it's been drilled out, what's left?

[rredbeak]

sounds sus to me


PJ

[Matt_vp]

there should be a pink wire and a pink and black wire, u sould be able to join these 2 wires to bypass it and u might have to cut the orange wire.

[zumanity]

so when you say it's been drilled out, what's left?

the only part of that that is left is the housing where the key once went in.....so is there a way i can disconnect the wires from that and join them to bypass it?

[zumanity]

there should be a pink wire and a pink and black wire, u sould be able to join these 2 wires to bypass it and u might have to cut the orange wire.

so is that for real mate? or are ya just mucking around?

[Matt_vp]

thats how i did mine on the weekend, there sould be 4 wires going to it, pink, pink and black, orange and a black one.

[zumanity]

thats how i did mine on the weekend, there sould be 4 wires going to it, pink, pink and black, orange and a black one.

ok thanks mate!


did you find these wires behind the bypass lock in the inside passenger door or elsewhere in the car?

[Matt_vp]

u have to pull the side bit off the dash then u will be able to see where the wires come off the back of the lock, go up then into the wiring harness in the dash, there might be a bit of steel plate there aswell that u will have to drill the rivits out off to get it off so u can cut and join the wires.