level 3 special features - AFR??

[pow3rslave]

ok, so you know how with level3 clusters, you can hold reset and mode when you turn the car over, it gives you digital speedo, and some other stuff? after this i hit mode, and it gave me some other stuff. voltage and one marked 'fuel' that starts looking like 1:5.5, but varies (goes to 1:2.5 etc when it warms up, and when you rev it it goes up to 1:double digits.

what is this, i heard its unlikely it's actually AFR so anyone else with a level3 tried this?

[pow3rslave]

anyone? here's a vid i tookwith my cameraphone

YouTube - level3 - AFR?

[88GreenVN]

Tried this when looking at my voltage. Also get a more accurate fuel usage when the engine is running and in park - normal read out is 0.

1 mode is to test lights and lcd's.

May have to go look at the book/s tonight and see what the go is.

[ephect]

i noticed the numbers were goin up when u rev'd it, if it was afr the numbers should go down, more fuel, less stoich.

its almost like a fuel usage indicator, no idea what the first number is ie 1 & 2.

[ashzv6]

more importantley,
what does it say next to the numbers in the left hand corner?

[pow3rslave]

more importantley,
what does it say next to the numbers in the left hand corner?

yeah that says fuel, that's what gave me the idea that it was an afr or similar. i just didn't know if it was relevant to anything afr-wise.

[statey1975]

Let's work on the number 1: 6.7

The 1 is just the number of the diagnostic test. The 6.7 is litres per hour of fuel used.

Now 2: 6.6

Once again, the 2 is the number of the diagnostic test. the 6.6 is the voltage coming from the fuel tank sender

[88GreenVN]

This was put on a thread too so here it is