coil pack

[ab56452001]

hi, got a coilpack of my mate, its of a vp, is it a straight swap on to my s-1 vn , thanks...........

[Stan003]

Sorry mate but it will only straight swap onto a S-2...

[Not_An_Abba_Fan]

No, it will fit. The series 1 had a one piece coil pack, a lot of people change them to the multi coils so if one failed it is cheaper to do.

[speedyvn]

No, it will fit. The series 1 had a one piece coil pack, a lot of people change them to the multi coils so if one failed it is cheaper to do.

Exactly as "Not_AN_Abba_Fan" says, if you bought the coil pack from the wreckers you should have the DFI underneath the coil pack. You need to take off the Series 1 coil pack and the series 1 DFI Module with it (the series 1 DFI is that thick metal thing under the coil. Just get a socket and undo the bolt that has the wires coming to the dfi and undo the bolts that hold the dfi and coil on and install the series 2 dfi and coil pack and you'll be right

[richardsworkcar]

They do fit, there is a plate you need fitted to the bottom of the DFI, Petroject sell them I think, you also need VN SII on leads (they are a longer lead) You can also buy the conversion kits Coil pack, DFI, Plate and lead sets they used to be about the $400 mark.

[Bz Kn33z]

Vn S1 Leads can fit cause i still got mine on the S2 coil pack but when u need to buy more leads just change to S2. What do people think about topgun 10mm leads?

[Not_An_Abba_Fan]

Some people have had dramas with Topgun, but if you don't have a race engine that pumps out 8000 rpm +, 10mm leads are no better than any other. A lead is a lead is a lead.

[vn calais manual]

overkill.

just go 9.0

[Bz Kn33z]

Whats a good brand of lead at the right price. i got boshe 8.0

[Not_An_Abba_Fan]

I use NGK.

[speedyvn]

I got myself a set of bosch leads for my car.... fairly new and are just as fine .. abba where abouts did you get yourself those ngk leads?

[Not_An_Abba_Fan]

Repco. But it was about 3 years ago and they are still going strong.