injector problem

[jet_pilot]

the other day i took out my injector's and fuel rail i put them back in yesterday and front driver's side injector sprayed fuel every where i thought the o ring mustve unseated itself so today i took em out again and checked all the o ring's made sure the injector's where tight and put them back in well same thing happened but the pressure wasnt as high as yesterday
o by the way its coming from between the fuel rail and injector not the manifold its got me stumped any ideas?

[greenfoam]

either the injector isnt plugged into the rail good or the injectors o ring is no good, only two options

[jet_pilot]

yeah ive just checked it again and same thing the injector's are as tight as possible (still wobly) the o rings look ok and i found that another injector the tip on the bottom is cracked the lil plastic bit but it is still holding together and running fine
i thought i could have something to do with depressurising the fuel line's as i could only crank it over since i had no ecu in the car would it still hold that pressure until startup?
dam this suck's i wanna drive her with the tune!

[Not_An_Abba_Fan]

New O rings then. They may look ok, but if they have flattened out on the edge then they will leak.

[jet_pilot]

new O's then would auto pro have them or be able to get them?

[Not_An_Abba_Fan]

They should be able to. Chances are they would have them in stock.

[Emackulation]

i had to buy a pack of 100 in my town, coudnt just get say 20...but that arnt that exy.

[immortality]

o rings are funny things, they'll work fine for years, even when they go a little hard, yet disturb em and they will be problematic. best to replace em all and forgo more trouble with leaking injectors later

[jet_pilot]

is $100 a good price for reco injector's and will vr and vn ones fit vp?
i think its dam cheap comes with new O ring's might be worthwhile ey

[jet_pilot]

bump.... cmon guy's i need too know quick thank's