SC-14 Prices.

[Bz Kn33z]

Hey people, Sorry if you hear these Qs alot but i know where i can get a SC14 with bolts,Brakets,Piping,two BOVs,fuel pressure reg,and more.
Its in good condition and i was wondering if $550 was a good price or average price for one any information would be great thanx.

[Bz Kn33z]

It is a proper CRS KIT BTW. and is coming off a VP V6 and is on a family car.

[1991_Vn2nV]

Sounds good to me mate.

[needwork2-4fillhabbit]

Hell yeah thats good, but expect to fork over another 200-230 for a pully wheel to get more psi. I was offered a kit from a person on these forums for 800. But decided to do it with made up brackets. Just so i could get the intercooling and not have wasted money on the other pod style intake. Ebay is selling alot of the 5,8,10,12 psi pulley wheels atm. 5 psi is the highest he makes that still uses the clutch tho. Oh could you send me some photos of your kit, either in the car or just when you get it.

[CSL]

i could make these pully's for 100bucks
alot less if done in bulk

[needwork2-4fillhabbit]

Ok well u have my interest, and im guessing a few other will get some as well, maybe you should make a topic so people can see it and show interest.

[Bz Kn33z]

What is the MM of the pully to get around 10PSI?

[needwork2-4fillhabbit]

Spose to be close to 82mm for 10psi 77mm for 12psi.

[stocky]

intercooled you need 75mm to reach 10 psi

[needwork2-4fillhabbit]

intercooled you need 75mm to reach 10 psi

Oh i will to remember that, ill hassle the ebay dude cos he says hes dyno'd to get results, maybe he did what you did stocky.. still has the bellmouth on?

[stocky]

Oh i will to remember that, ill hassle the ebay dude cos he says hes dyno'd to get results, maybe he did what you did stocky.. still has the bellmouth on?

most likely yeah

[1991_Vn2nV]

What sort of power are guys making with the CRS kits on 10psi, intercooled?

[needwork2-4fillhabbit]

Ill let you know in a few weeks, oh quick question will a vr motor drop straight into my vp with little hassles? I can grab one in about an hour,

[stocky]

What sort of power are guys making with the CRS kits on 10psi, intercooled?

probably up around 200rwkw or so

[greenfoam]

VN lukes pulley was about 73mm for 12psi intercooled

[Bz Kn33z]

What would be an average price for a SC-14 CRS kit?? what do they range from.

[CSL]

most CRS genuine kits go on ebay for about 800-1200 depending on add on etc, and you can buy em brand spankers from casltemain for $1995

i'll get started on these pully's soon

[CSL]

oh and i'll prob get it priced for stainless 303, oh and these will be professionally CNC machined cold rolled items

[needwork2-4fillhabbit]

Ok ill pm you now for your details ill send it to you tomorow.

[savage1987]

will a vr motor drop straight into my vp with little hassles? I can grab one in about an hour,

should do mate, off the top of my head...
They're just about the same motor with a bit more compression and some better valvetrain stuff

I'm pretty sure you can still use your current electrics, memcal etc, might want to check memcal with someone more knowledgeable though. Different compression might mean you should run the VR map for better fuel economy.

[Bz Kn33z]

DOnt they have an extra sensor and you would need loom and computer

[needwork2-4fillhabbit]

Well ill just wait then, i might look at an ecotec to throw in it. If the ecotecs have better power.

[Cheap6]

While we're discussing SC14 prices, how much would an SC14 on its own, without brackets cost?

[needwork2-4fillhabbit]

Theres a few on ebay every week at the most pay 420, delivery from perth to vic was 42 dollars so that should give you some ideas. Ive also got some brackets being made or started today ill post some pics of the brackets and diagrams if you want. They will be for vn and vps though. Ill also do a how to for the intercooler and for the sc14 to give an idea of how hard it is.

[friedchicken]

probably up around 200rwkw or so

That’s a little ambitious isn’t it? A stock vn makes what 90rwkw, so scale that by (10+14.7)/14.7 = 1.65 gives 150rwkw. Assuming the charger drains no power, which it will, and the engine efficiency stays the same, which it probably wonit.

That said, if someone can show me a dyno sheet that proves me wrong, id happily take back my comments :P