I'm thinking about getting a Level 2 cluster for the VP because i want a tacho ( having a manual without it is annoying ) but is the wiring there for it to work i.e. can i bolt it in and the tacho will work or do i need some bits and pieces?
We got rep back, yaaay!
Man, learn to do searches, seriously.... this has been covered so much.
Yes. Straight swap.
*Closed*
aZk.
No wiring needed, It has 3 plugs on the back that slot straight into the dash where the cluster sits. Seriously takes about 10 minutes all up to take the old one out slot the new one in.
The hard part is slotting all the little looms back into the dash facia surround (your parker light switch, emergency lights, cruise control etc) Even that couldn't be easier.
Originally Posted by wikky
make sure you get one from a car with the same motor as yours. i think the tacho settings are out if you use a V8 cluster on a V6
-------------------------------------------------------------------------------------------
* * [] [VP CALAIS INTERNATIONAL] [EFI 304] [T56] [] * *
* * [] [VP BERLINA LX WAGON] [EFI 304] [T5] [] * *
-------------------------------------------------------------------------------------------
STEALTHY's Shed Clean Out! Buy my ****
Originally Posted by davway
Originally Posted by JONNNNOOOOO!!
I have a L2 cluster in a Vn S1 and put 9l in it and it hardly moved didnt go over the red line could this be a V8 cluster lol ( because of the big droptank )
~ VN POWER ~ Click the scales
supose, it was dead on empty lol
~ VN POWER ~ Click the scales
cheers guys, it was hard to find a exact answer.
We got rep back, yaaay!
I thought he was saying that one colour is VN/P, and the other colour is VR/S.
Either way, DON'T use a VR/S clusted in a VN/P. However, you can use the gauges, taking them out of a VR/S dah, and putting it into you VN/P dash (Speedo, tacho etc)
-------------------------------------------------------------------------------------------
* * [] [VP CALAIS INTERNATIONAL] [EFI 304] [T56] [] * *
* * [] [VP BERLINA LX WAGON] [EFI 304] [T5] [] * *
-------------------------------------------------------------------------------------------
STEALTHY's Shed Clean Out! Buy my ****
Originally Posted by davway
Originally Posted by JONNNNOOOOO!!
cheers stealthy, i'm heading up to upullit tomorrow, hopefully i can find one.
We got rep back, yaaay!
You know you can use a level 3 cluster.
Without doing the wiring, the screens wont display anything, and obviously k's wont click over, but the gauges will still work. Just if you like the look of them better.
Same still applies, only VN/P clusters, and V6-V6 etc.
-------------------------------------------------------------------------------------------
* * [] [VP CALAIS INTERNATIONAL] [EFI 304] [T56] [] * *
* * [] [VP BERLINA LX WAGON] [EFI 304] [T5] [] * *
-------------------------------------------------------------------------------------------
STEALTHY's Shed Clean Out! Buy my ****
Originally Posted by davway
Originally Posted by JONNNNOOOOO!!
alls i know is that the one i have now is a green backing and the one i got out of it (original) was a blue......however i think the one i have now is out of a lexan so maybe they are green? and yeh never mix vr/s ones with vn/p....big mistake (never done it but herd it too many times to be trying) also i have about 5 clusters (series one vn) in the shed and some are green and some are blue....but yeh pretty sure that the vr/vs are only green not blue?
I think VR/VS are both also. When I bought my level 3 dash the guy asked what year and I said 91 so he gave me a green backed cluster. I removed my cluster from my car which was blue and the green cluster wouldnt work so I had to take it back. He happily swapped it over as he thought mine should have been blue...He thought earlier VN's were green, later blue. Im not sure if there is any pattern to it though.