hey guys. i put vt international rims on my vp but the centre cap doesnt go on over the dust cover. what can i do about this? can i remove it or do something with it?
anyone have any idea on what i can do???
-George
yea gets spacers from autobarn.
had the same problem with my r8's when they went on so i just got a hammer and belted the cap a bit and they went on.
the rims were designed to fit vt hubs thats why the centre caps wont fit
nah no abs looks like im gonna have to get spacers. thanx guys
-George
3mm should do the trick.. its what i use on my vp when fitting my vt signature rims.
HAHAHAHAHA!!!!!!!! Spacers to fit center caps!!!!!!!
All I did was was filed the ribbing back on the center cap (the cross brace bits) and flattened the very top of the dust cover the tinniest amount.
SPACERS ARE ILLEGAL!!!
Did any of you running spacers fit longer wheel studs?
Selling FG G6E Turbo and buying a N/A Supra
well i tried to modify my dust caps but did not succeed. even with the dust cap off the center cap doesnt fit on....looks like im just gonna have to get some 3mm spacers. theres no need to put longer wheel studs with such small spacers. theres plenty of thread on there.
-George
even with the dust cap off they dont fit...i cant really modify the centre cap as they aren't that thick...im going to get the spacers that just sit on the hub...not the bolt on ones...my rims will still be bolted to the studs that are on there.
-George
dude i had this problem all you got to do is a one of this little grinders from super cheap the real sharp bladed ones and cut abit of that centre stud off and the little cap is a dust cover when you get after market rims
[SIGPIC][/SIGPIC]
as in cut a bit off where the bolt goes in 2 hold the disc and bearing in? where the split pin goes?
-George
Man.. the wheels still sat on the hub. and still got many turns of the wheel nuts. no chance in hell im grinding my HSV centre caps, might be alright to do so with crappy holden ones. but saying that, its not just the centre cap thats the issue with VT onward style wheels. its the Offset.
Spacers might be illegal, so is anything about 17's on your ss, and probably half the **** you do to your car.
Ummm first of all over 17's aint illegal unless you live in the 1980's state of SA, get your facts right.
Second I have VY Sigs on my SS with no issue's, don't know what the problem is.
Third who cares about removing some material from the back of the centre cap, no one sees it.
Selling FG G6E Turbo and buying a N/A Supra
sorry i meant above 17's not about 17's.. and i do live in SA, and they will defect u for that here..
and i put spacers on with no issues?? so no need to make such a thing a massive issue, over a minor thing.![]()
First of all, this is just commodores, every discussion is actually and argument.
Just get custom centres, like i did.
Also have spacers on the rear, with longer studs.
-------------------------------------------------------------------------------------------
* * [] [VP CALAIS INTERNATIONAL] [EFI 304] [T56] [] * *
* * [] [VP BERLINA LX WAGON] [EFI 304] [T5] [] * *
-------------------------------------------------------------------------------------------
STEALTHY's Shed Clean Out! Buy my ****
Originally Posted by davway
Originally Posted by JONNNNOOOOO!!
how big are the spacers u use on the rear STEALTHY? i think i use 5mm to fit on the rear of my vp? do they still sit on your hub?
FFS Airstrike i couldnt care less?? i honestly dont give a rats about the rules in different states.
i was trying to give the poor guy some advice to fit his damn rims and yet you get upset![]()
im sure i could do a bit of research on your car and find some illegal **** but i dont care!