No spark???

[sebstenator]

my car has been really wierd lately.
before when it started it started but ran like a pig and couldnt rev high.
after we fixed the firing order but it still seemed like it was out.
then it said the 3rd cylinder was being fired first.
so i switched the leads around so the first cylinder was being fired first.
checked it but the first cylinder wasnt firing first anymore.

then noticed i lost spark in the 4th cylinder and now i dont have any spark in any of them???

i have no idea whats up.
iv got new leads sparks dizzy cap rotor button and coil.

anyone have a clue wots going on??
how do i test and set all the timing proply?

[wildss]

start by checking you have all the leads on right i posted a pic for you.
did you have your dizzy out at all?
check your coil to see if it works and ignition module by using one that you know works

[Not_An_Abba_Fan]

This may tell you what you need to know. Firing order Holden V8 and 6 - Holdenpaedia

[sebstenator]

iv got spark now and i hooked evrything up and the dizzy hasnt been taken out.
but how come it shows the firing order of 12784563? so 1st cyl goes to 1 2nd goes to 2, 3rd goes to 7 4th cyl goes to 8 and so on??
cos it looks different on the pic but ill giv that a go cos the way i did it isnt starting so fingers crossed.

[sebstenator]

nope no luck even with that diagram.
i dno if its got to do wit my battery being **** but yeh i have no clue wot the **** is goin on

[Not_An_Abba_Fan]

If it is turning over slowly, it probably won't start, it will need a good 80% battery capacity to fire.

Does yours have the twin contact rotor button?

[sebstenator]

im not sure.
but iv made all the timing correct and it sounds like its just about to start but it doesnt.
any ideas wot the problem could be?

[vn calais manual]

check fuel pressure.