Cruise Control

[vn88]

Howdy i know there is plenty of threads about cruise control but i cant find anything about wiring it up without using the loom. I have the switches on my dash installed, i have brake switches and the actual cruise module with the cable.

What i want to know is, are there wires behind the dash or in the engine bay that i can use to connect to the module or do i have to run all new wires?? Becuase the switches on the dash plug straight into where the old switches are. i know of the plug that is in the engine bay in some models but i dont have it in mine. I have a series 1 vn exec by the way.

The reason i ask is because i cant seem to find a loom with the cruise control plug in it already.

Thanks for any help.

[88GreenVN]

Howdy i know there is plenty of threads about cruise control but i cant find anything about wiring it up without using the loom. I have the switches on my dash installed, i have brake switches and the actual cruise module with the cable.

What i want to know is, are there wires behind the dash or in the engine bay that i can use to connect to the module or do i have to run all new wires?? Becuase the switches on the dash plug straight into where the old switches are. i know of the plug that is in the engine bay in some models but i dont have it in mine. I have a series 1 vn exec by the way.

The reason i ask is because i cant seem to find a loom with the cruise control plug in it already.

Thanks for any help.

I may have access to a CC loom. I'll call them tomorrow.

[vn88]

that would be great thanks mate. ill check here tomorrow afternoon

thanks

[FXST01]

Do these help?

[88GreenVN]

Ok Yes he has one - I'll grab it off in Friday arvo. He will look up the price of it for me - but wont be all that much. It is a new factory Holden loom used to retro fit cruise at dealerships. I can solder pins on the green & white wire so you can plug straight into the back of the main dash plugs. Then you have the earth (goes near the battery) & brake switch wires and the 4 wires that go to the switch block. Also I can put 4 pins on tham also if you like.

Then it's just a small hole/grommet into the fire wall for the loom to go through and you are done.

[vn88]

thanks mate. Ive sent you an email. If you could solder the pins on that would be excellent as well, i'm not the best at soldering.

thanks again,
Matt.

[88GreenVN]

thanks mate. Ive sent you an email. If you could solder the pins on that would be excellent as well, i'm not the best at soldering.

thanks again,
Matt.

Did not get the email - but I did get the CC loom

[88GreenVN]

Some how I only had 3 pins (4 needed) for the switch block plug. Just dunno - the 4th pin is Gone. The green & White have pins for the 2 dash connectors.

Problem is I wont be back to the wreckers until next Friday. (to get a plug off a loom to scab a pin out of.

[vn88]

Thats alright I'm in no hurry mate. Send me an e-mail when you've finished it

Thanks,
Matt.

[88GreenVN]

Thats alright I'm in no hurry mate. Send me an e-mail when you've finished it

Thanks,
Matt.

99.9% done. Never mind. I'm taking some VN Calais rims & tyres down to the wreckers next Friday - I'll get it done early so I can make the arvo post for you.

[88GreenVN]

All done now - I'll put the Cruise Control loom in the post for you (VN88) Monday morning.

Bugga not having the extra pin - lost 1 week - never mind.