vp waterpump

[elba]

i have a 93 vp and the front of the water pump spin(the bit where the belt goes) could i fix the unit or be better off buying a new one.looking for the cheapest way to fix as only going 2 b a work car.any help would b appreation

[Cheap6]

The only fix is to replace it. It's not expensive or difficult (provided you don't break a bolt or two.) Try a search on here there should be plenty of posts on how to do it and bleed the system.

[Morton]

Changing water pump VN/VP/VR

[centy]

ok just checking
you have a water pump leak of noise?
It's not the black pulley out front that has been bent of something?

[elba]

i was wondering were the wires go for the power windows from the fuse box vp93,in have power at fuse box but not at controls or window motor any help would b helpfull

[Vt-Brrrlina]

under steering column where fuses are but more under steering wheel is a small black box thatis your power window control box, wiring from there goes under the stereo to you power window controls.

[elba]

thnx vt brrrlina will try in morning

[elba]

if i have power goin into the power window controll box but not coming out do i replace the box?are these expensive? thnx mate

[elba]

found out that pully was the air con compresser pully(bottom right pully) is this correct?should it spin at all?thnx fellas

[Vt-Brrrlina]

the pully should always spin on the aircon - its only when its gassed and aircon button is pressed that the clutch is engaged to spin the inside part of it r ya aircon - so yeh it should always spin where ya belt is, umm if ya got a multi meter its easto test ya power windows the button controls just pop out ya dash bit and u can check voltage onthe contacts underneath it when youy press the buttons

[elba]

no voltmeter only test light

[elba]

would the central locking wiring b conected to elec windows 2 as central not working either