Keyless entry, hook up lights?

[anarklov3r]

How you going guys, I just installed a keyless entry system to my VN Wagon and it all works fine, except, i have no idea how to connect the unit to the lights so that they flash. The unit has 2 wires (brown with 10a fuses inline) that are labeled Flash Lights, but the wiring diagram is very basic and doesnt tell me how to do it!

Where abouts would i get access to the lights, and how should i go about connecting this thing up?

Its a Warlock system bought from JB HiFi (Dominator AC100 keyless entry + Dominator KG400 remote locking kit)

Thanks alot guys!

[georgeonboost]

remove the steering column shroud and find the wires for the indicators that run to the indicator stalk. this is what i did but i cant remember for the life of me what colour they were. was a long time a go. have a look in a gregory's or a haynes repair manual. they should tell you what colours the wires are.

George

[clubsport_replica]

yeh but dont go hooking them up to left or right, as it wont work correctly, well with mine anyway i had to hook it up to hazzards..

also was thinking to hook it up to headlights instead

but just get a test light or volt metre and put the hazzards on then check the wires until it flashes the test light or gives u volts on/off...

[georgeonboost]

i hooked mine up to left and right...work perfectly as there are 2 wires, left and right.

George

[stockies]

Mines hooked up left and right. I think from memory, it's a dark blue wire with a yellow stripe for one of them. Just a circuit tester on the wires and switch on the indicator, if the tester flashes, thats your wire.