help please vp irs mags

[victtor]

HI i own a vp ss 304 with irs rearend,can any one tell me brand names off 16,17.18s that will fit
I got told 17'' ROHZS are the correct offset ,there must be other brands that have been made in the past
Would longer studs be stronger then bolt on spacers ,the thinsest you can go with bolt on spacer is 15mm any ideas or thoughts on this please
thanks
victtor

[TAILS83]

i looked into this and was to hard in the end and kept my stock clubby rims. but you han stick on any rim really but wil scrap in the inside a bit. you could go to a tyre shop and try out a few rim sizes and see. 225/17 might might work as there not to wide. just find rims you ike at a shop and see if they'll fit it up though.

[victtor]

THANKS tail83 for advice anyone else know off and mags that will fit thanks

[greenfoam]

victtor, BMW rims are closer but it's much better to just convert to the VS hubs and then you can run normal Commodore rims

[Commydoor]

These were on my VR with IRS and sat just inside the lip by less than 1/2 inch....
http://forums.justcommodores.com.au/...oys-tyres.html