~Bz Kn33z Black VN~

[VNenvy]

any updates

[Morton]

He's as lazy as me, lately ^_^

[VNenvy]

i just bought a sc-14 what sort of belt do i use lol

[Bz Kn33z]

Morton, Yes i am very lazy all i need is abit of pipe work done the 3inch cat welded and a tune

You can use the factory VN belt but you wont have your aircon if you do, otherwise you will need a longer belt, but who needs there aircon neways takes to much power haha. Did you get a CRS kit or homemade brackets, i got a couple of CRS brackets if you need any.

[VNenvy]

mines a real different bracket i need to get some pics up for ya

[Bz Kn33z]

Ok then, well if it doesnt work out you know where to come haha

[VNenvy]

i measured my pully on the sc14 and its 70mm lol wat sort of boost am i lookin at there

[Bz Kn33z]

77mm is 12 i think

[Morton]

As Blackboard from Mr Squiggle used to say:

Hurrrry Uuuuuupppp!!!

[Bz Kn33z]

Most of the things are done, i just need to clean/paint the intercooler piping and fit it, install injectors and work something out for a tune and its all go, oh and a boost controller lol. then i will start sanding the car back and fitting the bodykit.

How is your process going?

[delcowizzid]

so i should pull finger and find a chip big enough and send one LOL im slack sorry mate :P

[Bz Kn33z]

Just bought some VQ stato seats for the VN cant wait to fit them, i'm not sure if i am correct or anything but was there a difference between the VQ seats the better one of the 2 if so not sure if i got the good one but they look alot better than my SS seats haha

[Bz Kn33z]

Fitted the seats they are heaps comfy i might fall asleep while driving the car it might have been a bad idea lol, i might take a picture its abit dark atm.... so might not be great picture

[Bz Kn33z]

Here are some happy snaps of the VQ seats its dark but people get the picture.... they feel great nearly fell asleep on the back seat while fitting it.[IMG][/IMG]

[Bz Kn33z]

Got my Tune for the turbo, and i took it for a quick spin around the block it Hits hard in 2nd at 4grand and then lights the wheels up on half throttle, and 3rd comes in at 4g also and puts you back in your seat, the recorded boost was 10psi i was hopeing it would have been a 7psi springs but oh well, all i need to do now is a couple of small things.

Fit 070 fuel pump/ Surge tank
I will be doing this with the 80lt V8 drop tank i just bought
I need to plump back the Wastegate because its to loud lol
and make a bracket at the back of the dump onto the head so it takes some weight off the dump it was leaking a little
bit, she is slowly coming together i have to move houses soon so i have to get stuck into everything so i can drive it there.
But i am over the mood about it pulls real hard scared me for abit cause i was expecting it to kick in early not late and have me skiing down the road sideways haha good fun.

[Bz Kn33z]

Also i have made a Ported Box for my Rockford T1 15 for the VN i will be making a boot layout like i did in my old car here are some pictures of the bump. Its 18mm MDF with Corner Quad inserts tuned to 38hz with a 2.5inch vent.

I put it in my mates Magna and its hard to get bass out of a magna but it sounds pretty good,

[delcowizzid]

so its got more power than the sc14 then LOL

[Bz Kn33z]

More Psi as well lol, i read 10.5psi, dunno how it was suppose to be a 10psi spring in the wastegate and i also cut the spring a coil but it didn't change it the set PSI.

All i need is a Surge tank setup in the boot now and she will be right,

[Matt_vp]

Turbo is way better than the little loud sc14s.
Looking good mate.

I'm in the same boat. Just waiting for the fuel pump to turn up. Everything else is ready. Just got to connect the hoses and wiring.

[Bz Kn33z]

Yeah it feels alot better, and didnt even stall on me like the sc14 use to. I just have the VL-T pump for now, and i am after the surge then its all good to go, i cant wait to go for a good afternoon sunday drive in it

[Bz Kn33z]

I just bought some 15X7 Pursuit rims, all in great nick for $60 very happy with the price i thought i got a bargain, now i just have to sell the chasers

[Bz Kn33z]

Went to fit the 85lt drop tank on my VN and replaced all the hoses painted it liquid chrome with black straps. I fitted one strap up fine and the other one is different the left side on mine is bolted and this one is a wedge type fitted one so i will cut it off and weld 3-4inches of my old strap onto it so i can bolt it up. then i can fit the surge tank and external pump. lack of motivation that is for sure haha.

[bj42turbo]

Went to fit the 85lt drop tank on my VN and replaced all the hoses painted it liquid chrome with black straps. I fitted one strap up fine and the other one is different the left side on mine is bolted and this one is a wedge type fitted one so i will cut it off and weld 3-4inches of my old strap onto it so i can bolt it up. then i can fit the surge tank and external pump. lack of motivation that is for sure haha.

Thats pretty much what I did, overlapped them a few inches rather butting them up to each, works fine


Dazz

[Bz Kn33z]

Yeah pretty straight forward i thought it was just a bolt up job, are all the V8 straps the same? this came off a 94 stato from that the sender unit and guy that i bought it off told me.

[Uoyon]

You think you could post some updated photos? Like all angles, frothing so hard