Features I Got With The Car
Interior
SS Seats
Car Alarm – Immobiliser - Keyless Entry
Central locking
Tinted Windows
Tacho Dash
Exterior
15 Inch Good Tyres
Solex High Tech Locks boot/doors.
Camelion Wiper Blades
Pearl Cherry Black Gliter Paint
Clear Tail Lights & Wiring Loom
Under Hood
New Air Filter
New 550 CCA Battery
New Harmonic Balancer
New Crank Angle Sensor
New 1 Inch Master Cylinder
New Exhaust Sensor
New Oil Pump Sensor
New Spark Plugs & Leads
New Oil Filter
New Brake Pads Front/Rear
New Fuel Filter
Service Oil/Tranny/Brake Fluid
What ive done to it last couple months,
VR Coil pack
Transmition Cooler
VS S/C Cold air intake
Painted engine bay. ( was red)
New fuel pump
Alternator reg
Letterbox Grill
Chrome Wiper washers White LED (hooked up to headlights)
Bright Blue alarm LED heaps better.
VP SS V8 TB
2.5 mandrel bent exhaust
Crystal clear headlights/parkers.
Painted fueltank and straps
Painted calipers/rotors Red silver (HSV)
Morton style Computer Chip. Thanx to FoamRacing.
Future Plans
Building Back Parcel shelf 3/4MDF
Building Boot layout, 2 12 Rockford fosgate subs and amp.
Lowering it
Heaps more to mention.
I have a Manual gearbox and motor to go in when i get more cash up
but i'm thinking of going down the path of supercharging it.
Last edited by Bz Kn33z; 25-05-2008 at 03:21 AM.
Looks cool, definetely needs the 18's asap.
get come more pics so we can see the glitter paint a bit better, engine shots also..Good luck.
Still in the shed but getting more done to it, Preparing it for a roadie and rego soon, hope i dont get knocked back on heaps of things.
Also in the post is my 2.5 mandrel bent exhaust straight thro muffler and also 3inch tip
Should sound good also looking out for extractors.
Saving 4 tires on the 18s, will get more pics when i fix my computer cant hook up camera to it![]()
Hey i managed to get the computer workingso i have some other photos of my black VN, I still haven't done much to it just hosed the dirt off it
still pretty dirty (dont mind the grille its just sitting in there haven't screwed it in.)
I have some money saved up for it to be lowered with my 18s on it soon.
Tell me what you think.
Got my exhaust today 2.5inch mandrel bent cat back system no resi and a 3inch tip.
didnt have ramps so i was under there with the jack pain in the ass trying to get the old
exhaust off where the connector bit goes over the axel wouldnt come out so i attacked it with a angle grinder lol. put the new one on and it sits low at the back just need to adjust the back bracket and she all good.
My car hasnt been started for awhile and now it sounds like its missing only in Park in drive and reverse you cant hear it but yeah might be spark plugs i checked the leads and fuses and coil pack.
Good to see she is back up and running, dont worry about the miss for now, just give the old girl some hard drviing and shell be fine, whenever the VN of mine would run a bit ****ty a good boot full always brang her back to good. Depending on how long youve had it sitting there I would stick a litre of metho in the tank to clean the condensation and water out, if there is any.
just ble out a lil bit of grey smoke and yeah, the exhaust is smokeing abit cause all the sticky Sh1t they wrapped it in but yeah sounds good bit different to other v6s, looking at getting extractors but cant find any cheap 1s and soon i am getting it shift kitted. the price of the kit is $350 is that cheap average or dear thanx
Stage 1 or 2 shift kit? Oh yeah, make sure to put some metho in, it works good :P
Thanx mate i will do that. Stage 2 Shift kit with Corvette servo aswell.
Got some paint today and some prices on heads. VN V6 Shaved heads the pair $105 shaved 30tho is that a good price what else would i need for it just wack it all up?
Also got paint for the calipers,rotor and fuel tank the tank is going grey/silver colour and black straps do you think that would look good any ideas.
Also doing the calipers Red and Silver like the HSVs and silver rotor hub.
update: painted fuel tank not finished dunno if i will stick with that colour what do you think? still have to give it more coates of paint and paint the straps black. also have done calipers red and the sheild behind it black dont have pic though.
nice ride good to see another black vn lol umm so wat are u doin to urs?
SPY-185
Fuel tank looks nice, will look heaps better with back straps..
That sounds pretty cheap for the heads, if you want a full-on head port+grind then you'll have to pay $700+, so just stick with that..
$350 for a shift kit is OK i guess if you live up north of melb(bush), i got mine done in epping for $250 @raceshift..really changes your car.
Hell yes it does. I had shift kit / larger boost valve / corvette servo inc. fitting plus trans service for $450 from transdiff in Bayswater. It's amazing the difference in gear shift as soon as you drive it after it has been done.
Best cash i ever spent besides a chip retune and extractors.
Originally Posted by wikky
Got some 1000kg ramps 4 chrissy would have helped if i got the earlyer when i put the exhaust on.
Plans for the car is Lowered looking for superlows Front Altras in rear.
New head unit getting my rockford amp fixed cause it earthed out in the sub box shorted it out or sumfin still making sub layout for the boot amp in floor 2 subs reversed all decked out. yeah alot of plans.
Going for a road worthy early Feb i know i will get knocked back on things i will leave some so they can pick at it probly 7-8 things dunno maybe more lol. its got a sports steering wheel on it with bosskit but horn dont work need to get another steering wheel the pin isnt touching the bosskit or something so no connection steering boot is off 1 side more to mention.
Put crystal headlights in it the other day and parkers looks heaps better gonna buy new headlights cause the old ones are abit dull looking.
i reckon u shood lose the clear taillights. they make it look faded and old. jus get stock ones and a vp boot garnish and tint the **** out of it. then drop your car on its guts. and if ur gonna keep the 15's go silver stockies. or get some bigger rims. u shood probly cut that exhaust tip down a bit too lol.. just some feedbak i thought id put in
Yeah i have the normal tail lights to go in getting it lowered after i go for roadie i have 18s in the shed 6 stockies and 4 15s thats what is on the car and the exhaust tip is long gone lol i have 2.5 mandrel bent catback 1 muffler on it now thanx for the feedback.
Car doesnt miss nomore must have been the fuel in it cause it was sitting for awhile put metho in it and still missed, but put some 98octane fuel in and she is all good now doesnt miss at all and sounds heaps better now with the new exhaust.
Ditched the old 3inch chrome tip and got another tip 2.5inch out to twin 3inch chrome tips, up here they are $130 got it for $53 sent to my door looks good, getting it welded on soon would look good out the backsending my memcal to greenfoam next couple days let him do his work cant wait till i get her on the road get some more mods and get a Gtech do some runs see how she goes.
~ VN POWER ~ Click the scales
Got my Tune of GreenFoam the other day and put it into the car and i just has to take it for a run up the street and back (closed street) and i have only driven the car twice on the road and the first day i did it it was good had some power (stock as a rock) and months down the track took it out with new CAI 2.5 mandrel exhaust and other little mods and the Morton style tune thanx to foamy, and it was unreal the amount of pick up its got is unreal it just wanted to keep going the throttle response is awsome i'm more than happy with the tune cant wait till i get this beast on the road. all the V8 owners are probbly saying its only a 6 well i no but she goes good for a 6.
Thanx foamy give me a sticker so i can put it on the car![]()
~ VN POWER ~ Click the scales
looks very mean in black,,i like it alot..hard to keep clean
Thanx mate, yeah it is hard to keep clean got a dirt driveway.
~ VN POWER ~ Click the scales
Tonight i had a play with the V8 throttle body, cause the TPS wasplaying up and i fixed the problem thanx to all the People on JC. On the TPS i drilled out 2 Holes to make it wider so i could move the TPS around abit more took prob 4-5mm so it stopped the engine light coming on so no more light, all i have to do now is set the idle Thanx guys.
~ VN POWER ~ Click the scales