AHHHH brain fart
vaccum gauge going in soon, instal help?
where do i tap into the vaccum line etc? ive allready got the wiring sorted its just the vaccume line that i need to know about, also will i need to get an extention of the tubing?
also does having a vaccume gaue effect the performance at all? eg loss of vaccum?
thanks in advance
you dont turn a holden off
you power it down!
for any one who asks, holdens dont leak oil, there marking there territory
on holiday
it wont effect performance at all as its sealed so it holds vacuam.tee into the vacuam line that comes off the manifold and goes into the firewall that goes to all the dash controls tee in close to the manifold as you can.
I tune the oldschool way fear on the passengers face and knuckle colour cant go wrong
tabbacco is still my favorite vegetable
AHHHH brain fart
sweet as, got any pics?
you dont turn a holden off
you power it down!
for any one who asks, holdens dont leak oil, there marking there territory
as if you are above the engine looking down onto it....Originally Posted by PSYKO PHOENIX
Tap the gauge (using the tee-piece) inbetween the plenum and the one-way valve... its very squishy near the firewall.... but it is there!
AHHHH brain fart
wicked, your a champ, thanks heaps!!!
should i use the same hole in the firewall that my other gauge senders are running through??
you dont turn a holden off
you power it down!
for any one who asks, holdens dont leak oil, there marking there territory
you can run the vacc line anyway you like... depends on length of the line you have... but take this in mind... the shorter the length, the crisper the response....
AHHHH brain fart
sweet, any good areas aka holes in the fire wall to run it through (to the gauge??)
at the mo my oil temp and pressure is running through the clutch cable hole
you dont turn a holden off
you power it down!
for any one who asks, holdens dont leak oil, there marking there territory
Jizz in my pants
I'd run it with your others in the same hole, keeps em nice and tidy and not all floating around.
Gas, Ass or Grass nobody rides for free
You tell him (coz you are right)
AHHHH brain fart
sweet, any need to heat shield it?
you dont turn a holden off
you power it down!
for any one who asks, holdens dont leak oil, there marking there territory
Jizz in my pants
na vacuum hose is usually pretty heat resistant, just run it somewhere not too close to your exhaust.
Gas, Ass or Grass nobody rides for free
You tell him (coz you are right)
AHHHH brain fart
sweet and theres only one vaccum line back there right??
you dont turn a holden off
you power it down!
for any one who asks, holdens dont leak oil, there marking there territory
AHHHH brain fart
here are some pics i just took of the lines behing the plenum, which one is the vac line?
[ATTACH][ATTACH][/ATTACH][/ATTACH]
you dont turn a holden off
you power it down!
for any one who asks, holdens dont leak oil, there marking there territory
See in this attached pic...
THis is the vac line im talking about with the one way valve...
If you want to check it youself... Start your car.... then after a few seconds... stop the car.
If you then pull the hose off at the plenum, nothing will happen, but then, pull the check valve off, and it will suck air in the hose for a few seconds then stop. prooving its the vacuum hose.
AHHHH brain fart
sweet as, thanks heaps mate, i just wanted to make sure before i cut anything
you dont turn a holden off
you power it down!
for any one who asks, holdens dont leak oil, there marking there territory
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote
