Tensioner arm

[tt460]

How hard is it to replace the tensioner arm on the emotec V6

[Zuicider]

easy as piss, once you undo the pully bolt with the belt on, take off the belt then just unbolt it

[tt460]

Im talking about the whole unit, my mates has stripped the thread bloody left hand threads and need to replace the whole unit,as a temp fix i have put a 8mm bolt in it with a nylock nut on the back.

[Chappo_1]

I did mine a few years back, did the same thing, learnt the hard way it has a left hand thread on the pulley.
I remember I removed the alternator, not sure if I had to or not, but it made the job easier. It was a pretty straight forward job.

Hope this helps.