Results 1 to 16 of 16

Thread: This is My Vehicle Speed Sensor, Can it Be Fixed?...

  1. #1
    Ride
    S2 VX V6 Berlina Wagon, 304 VL Berlina Wagon.

    Join Date
    Feb 2009
    Location
    Sydney, Little Bay..
    Posts
    647

    Exclamation This is My Vehicle Speed Sensor, Can it Be Fixed?...

    hi guy's previous owners or someone before them cut the wires right down low so i cant solder or earth them etc... will a TV repair joint Be0able to fix this ****-up...

    cause Holden want's to STEAL $290 of my money for a new one....

    IT looks like it can be opened, but i cant get it opened (cause i dont want to break it...) thanks guys. NOTE: there should be 3 wires coming from there..
    Attached Thumbnails Attached Thumbnails This is My Vehicle Speed Sensor, Can it Be Fixed?...-p260609_14.49-01-.jpg  

  2. #2
    delcowizzid's Avatar
    delcowizzid is offline on holiday
    Ride
    в∞ѕтεכ √&

    Join Date
    Jul 2008
    Location
    NZ
    Posts
    4,765

    Default

    i can get my hands on one if you want a new one posted over mate.they are cheap as chips from the wreckers
    I tune the oldschool way fear on the passengers face and knuckle colour cant go wrong
    tabbacco is still my favorite vegetable

  3. #3
    88GreenVN's Avatar
    88GreenVN is offline Almost not here!
    Ride
    88 Green VN Wagon 389,000kms

    Join Date
    Jun 2006
    Location
    Deep South - VN Country
    Posts
    6,245

    Default

    $25.00 from the wreckers almost anywhere.
    White 05 V6 VZ Executive - Thrashed Ex Telstra car
    and 3 Dangerous non ABS VN's

  4. #4
    Ride
    S2 VX V6 Berlina Wagon, 304 VL Berlina Wagon.

    Join Date
    Feb 2009
    Location
    Sydney, Little Bay..
    Posts
    647

    Default

    even for a T5 one?.... this is the one from my T5?...will it still be cheap, i went to my local wreckers and they said they didnt have any...delco...can u get them new?..or second hand?..

  5. #5
    Chirpstr's Avatar
    Chirpstr is offline A new project attack
    Ride
    VR Berlina M5, VP M5

    Join Date
    Sep 2007
    Posts
    1,392

    Default

    I'm pretty sure a VN/VP auto one is the same just different coloured wires. Can someone confirm this?
    Also it's very common for the wires to snap off there.

  6. #6
    delcowizzid's Avatar
    delcowizzid is offline on holiday
    Ride
    в∞ѕтεכ √&

    Join Date
    Jul 2008
    Location
    NZ
    Posts
    4,765

    Default

    yeah manual and vn-vp auto the same part the last one we bought was cheap as second hand just scope out a few wreckers
    I tune the oldschool way fear on the passengers face and knuckle colour cant go wrong
    tabbacco is still my favorite vegetable

  7. #7
    Ride
    S2 VX V6 Berlina Wagon, 304 VL Berlina Wagon.

    Join Date
    Feb 2009
    Location
    Sydney, Little Bay..
    Posts
    647

    Default

    YAY!! so this is confirmed That i CAN use a VN Auto one?....I have a VN here that i can take it off!!....so yeah?...i can use the one from my VN?...

  8. #8
    delcowizzid's Avatar
    delcowizzid is offline on holiday
    Ride
    в∞ѕтεכ √&

    Join Date
    Jul 2008
    Location
    NZ
    Posts
    4,765

    Default

    normally have plugs on the ends of the wires.will fit sweet as
    I tune the oldschool way fear on the passengers face and knuckle colour cant go wrong
    tabbacco is still my favorite vegetable

  9. #9
    Ride
    S2 VX V6 Berlina Wagon, 304 VL Berlina Wagon.

    Join Date
    Feb 2009
    Location
    Sydney, Little Bay..
    Posts
    647

    Default

    Quote Originally Posted by delcowizzid View Post
    normally have plugs on the ends of the wires.will fit sweet as
    and will it be located in the same spot as the T5?......


    so the VSS plugs straight into the manual loom?... thanks delco..

  10. #10
    delcowizzid's Avatar
    delcowizzid is offline on holiday
    Ride
    в∞ѕтεכ √&

    Join Date
    Jul 2008
    Location
    NZ
    Posts
    4,765

    Default

    well i dont know about direct plug in theres a possibuility that the plug may have changed between models but it will work
    I tune the oldschool way fear on the passengers face and knuckle colour cant go wrong
    tabbacco is still my favorite vegetable

  11. #11
    Ride
    S2 VX V6 Berlina Wagon, 304 VL Berlina Wagon.

    Join Date
    Feb 2009
    Location
    Sydney, Little Bay..
    Posts
    647

    Default

    ahh k....so i'll have to heat the soldering iron up... thanks delco and wavez

  12. #12
    Ride
    S2 VX V6 Berlina Wagon, 304 VL Berlina Wagon.

    Join Date
    Feb 2009
    Location
    Sydney, Little Bay..
    Posts
    647

    Default

    ok, just went down there to get it...got under the car and started to unplug it....it did the same thing as this one, so i rang the wreckers, they have some there for $33,..so pissed off, $33 that ii shouldnt have to spend, but ohwell....thanks guys

  13. #13
    Ride
    S2 VX V6 Berlina Wagon, 304 VL Berlina Wagon.

    Join Date
    Feb 2009
    Location
    Sydney, Little Bay..
    Posts
    647

  14. #14
    eurekamad94's Avatar
    eurekamad94 is offline street kiddo
    Ride
    kitted, tuned, sick pantha VS

    Join Date
    Jan 2008
    Location
    qld
    Posts
    311

    Default

    the vr has an electronic auto the vn isnt electronic

    and your manual is also non electronic
    Eureka styles!

  15. #15
    delcowizzid's Avatar
    delcowizzid is offline on holiday
    Ride
    в∞ѕтεכ √&

    Join Date
    Jul 2008
    Location
    NZ
    Posts
    4,765

    Default

    the vr one doesnt actually make contact with the output shaft of the gearbox like vn-vp and manual senders and is only 2 wires.the vn ones actually connect physically via cogs
    I tune the oldschool way fear on the passengers face and knuckle colour cant go wrong
    tabbacco is still my favorite vegetable

  16. #16
    Ride
    S2 VX V6 Berlina Wagon, 304 VL Berlina Wagon.

    Join Date
    Feb 2009
    Location
    Sydney, Little Bay..
    Posts
    647

    Default

    oh ok, i actually got it opened, wires cant be fixed.but i can get a VN one for like 25....thanks heaps guys

Similar Threads

  1. Vehicle Speed Sensor
    By JoeNess in forum Electrical Wiring / Questions
    Replies: 2
    Last Post: 11-05-2008, 09:25 PM
  2. vehicle speed sensor wire
    By stocky in forum Electrical Wiring / Questions
    Replies: 5
    Last Post: 17-12-2006, 10:59 PM
  3. Vehicle Speed Sensor
    By Apoc in forum VN - VP Holden Commodore (1988 - 1993)
    Replies: 4
    Last Post: 25-06-2006, 11:45 PM
  4. Vehicle Speed sensor
    By MJohns in forum VR - VS Holden Commodore (1993 - 1997)
    Replies: 0
    Last Post: 21-05-2006, 05:22 PM
  5. vehicle speed sensor for vl
    By customcaraudio in forum Electrical Wiring / Questions
    Replies: 1
    Last Post: 13-01-2005, 10:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72