Results 1 to 7 of 7

Thread: keep blowing parkin lamp fuze!!!!!

  1. #1
    Ride
    VR Executive

    Join Date
    May 2009
    Posts
    23

    Default keep blowing parkin lamp fuze!!!!!

    as title says keep blowing this fuze it has only happend after the car has been reregisterd on the road...

    although while it was off the road alot happend to the car so if any one could help me out why i keep blowing this fuze it would be great guys..

    i have done auto to manual conversion

    rewired speedo for t5 sensor

    new head unit was installed

    could it be one of these things thats causing the issue ?????

  2. #2
    vlv8vic's Avatar
    vlv8vic is offline <---Brad Quaid = internet stalker
    Ride
    M5

    Join Date
    Mar 2005
    Location
    Australia
    Posts
    3,774

    Default

    Any one of those things done slightly wrong might blow a fuSe. Perhaps you could start with the headunit, unplug it and see if that saves your fuSe. Could be as simple as wrong globes, water in the parkers, dodgy earth.
    Is it the correctly rated fuSe?
    Someone might have a more specific idea.

    When does it actually do it? when you start the car? drive? turn the lights on? fill us with info.....

  3. #3
    wamboin23's Avatar
    wamboin23 is offline Donating Member w/ Boost
    Ride
    VS Calais - L67 + T5 | VR Acclaim V6

    Join Date
    Apr 2009
    Location
    Wamboin, NSW
    Posts
    882

    Default

    i'd unplug the head unit, sounds like the earth for the headunit has been wired into the park light circuit. rewire the earth from the head unit directly to a body earth somewhere. just do not put in a larger fuse than what it says. I've seen some pretty awesome (expensive) damage to wiring looms because of this exact problem...

  4. #4
    Ride
    VR Executive

    Join Date
    May 2009
    Posts
    23

    Default

    Any one of those things done slightly wrong might blow a fuSe. Perhaps you could start with the headunit, unplug it and see if that saves your fuSe. Could be as simple as wrong globes, water in the parkers, dodgy earth.
    Is it the correctly rated fuSe?
    Someone might have a more specific idea.

    When does it actually do it? when you start the car? drive? turn the lights on? fill us with info.....

    yeh mate corect fuze its a 15 amp ....and it does it when im driving at night not straight away just randomly thats y it was worrying me....also i checked my globes today one was blown and i replaced and the connection the globe plugs into is very loose and will only light the globe up when i squeeze it also while i was playing around with it the fuze blew again... so i will fix that prob and see wat happens then...


    i'd unplug the head unit, sounds like the earth for the headunit has been wired into the park light circuit. rewire the earth from the head unit directly to a body earth somewhere.

    i used all the existing wires from my xplod headdeck to wire the new one up but the xplod one was preety dodgy(i did not wire it tho) and had been earthed on the cigarette lighter so i will pull that out re earth it on the body somwhere not only that my speedo sensor and is goin to the same earth but there is currently no fuze for that...

    one other thing i can think of is commodore has had a stato front end put on it and i sussed the wireng out on that and nealy died its done correctly but the with the wrong sort of wire the original wires for the headlights etc is 3mm wire and they have used speaker wire(positive and earth for one wire ) so inothere words they are using two bits of 1.5mm wire to make one 3mm wire and have justed twirled it and taped it of no clips are used at all

    dodgy as i have alot to investigat will let you no how i go

  5. #5
    Ride
    VR Executive

    Join Date
    May 2009
    Posts
    23

    Default

    well its got wirse keeps blowing them as soon as the fuze is put in and the parkers are turned on


    time for auto sparky i think

  6. #6
    Ride
    VR Comm

    Join Date
    Oct 2008
    Posts
    2

    Default

    Hey man had a similar problem with my VR when i put me head unit it. I found that it was the yellow wire that comes from the dash that you connect with the harness etc was the problem. No probs scice i cut that baby

  7. #7
    Ride
    VR Executive

    Join Date
    May 2009
    Posts
    23

    Default

    PROBLEM SOLVED!!!!!!!


    i had a short in my parker lights wiring i rewired them with new stuff and all good thanks for all responses lads

Similar Threads

  1. where to get a VP SS Fog lamp Lense?
    By PaRaDoX in forum VN - VP Holden Commodore (1988 - 1993)
    Replies: 9
    Last Post: 02-11-2007, 09:02 AM
  2. vt console lamp
    By ringfeder3 in forum VT - VX Holden Commodore (1997 - 2002)
    Replies: 3
    Last Post: 28-05-2006, 10:59 AM
  3. blowing fuses ?? park lamps & brake lamp vn
    By goldyboy in forum Electrical Wiring / Questions
    Replies: 7
    Last Post: 27-06-2005, 03:55 PM
  4. Oil Lamp On
    By MuNtEd in forum VR - VS Holden Commodore (1993 - 1997)
    Replies: 2
    Last Post: 19-10-2003, 06:42 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72