Those with VS v6 autos...

[Reflector]

At what revs does your car change from 1st to 2nd and have you ever hit the rev limiter?

Also what's mods do you have...

[immortality]

@ full yhrottle min hits about 5700-5800rpm going from 1st - 2nd.

stock engine except MACE insulator and spacer, CAI etc.

[WogBoyz]

yeah mine hits about the same rpm just before 6000 last time i checked i got to about 90 - 95 before it changed that was only 3/4s throttle (from 1st to 2nd btw)

[pillzor]

mine changes at the redline in 1st with about just over half throttle ( shift changes are later due too a chip )

[SweetWagon]

yeah mine hits about the same rpm just before 6000 last time i checked i got to about 90 - 95 before it changed that was only 3/4s throttle (from 1st to 2nd btw)

I doubt you could stretch 1st gear to 90-95kmph, 60ish is where they usually change into second

[Reflector]

yeah mine hits about the same rpm just before 6000 last time i checked i got to about 90 - 95 before it changed that was only 3/4s throttle (from 1st to 2nd btw)

Man that's pretty er... insane really. 90-95km, is that on a stock engine?

Reason behind wanting to know is, I just put a stage 4 memcal chip in and was curious to know if it's made a difference compared to others. I thought it did but maybe it hasn't.

Anyone know if there's a way to extend the revs before it changes? Or is that all programmed in the ECU?

[jujibelly]

I believe it's up to the ECU.

[Philthy]

Man that's pretty er... insane really. 90-95km, is that on a stock engine?

Reason behind wanting to know is, I just put a stage 4 memcal chip in and was curious to know if it's made a difference compared to others. I thought it did but maybe it hasn't.

Anyone know if there's a way to extend the revs before it changes? Or is that all programmed in the ECU?

Ask the bloke you got the "stage 4" memcal from?

[WogBoyz]

I doubt you could stretch 1st gear to 90-95kmph, 60ish is where they usually change into second

hahaa woaps i remebered that it was from 2nd gear not first, sorry lads!

ill give it a run 2mro and post back my results

[WogBoyz]

Man that's pretty er... insane really. 90-95km, is that on a stock engine?

Reason behind wanting to know is, I just put a stage 4 memcal chip in and was curious to know if it's made a difference compared to others. I thought it did but maybe it hasn't.

Anyone know if there's a way to extend the revs before it changes? Or is that all programmed in the ECU?

nah mate my engine isnt stock

ill give it a go 2mro and see what speed it goes too

[delcowizzid]

Man that's pretty er... insane really. 90-95km, is that on a stock engine?

Reason behind wanting to know is, I just put a stage 4 memcal chip in and was curious to know if it's made a difference compared to others. I thought it did but maybe it hasn't.

Anyone know if there's a way to extend the revs before it changes? Or is that all programmed in the ECU?

probably find the chip you bought has no shift changes done in it at all if it changes at the stock speeds like your old chip pilzor runs one of mine think he noticed the shift differences

[pillzor]

sure did delco.... even better when this lvl 2 shift kit gets dumped in soon

[WogBoyz]

im getting my stage 2 shifty kit in 2mro

[Reflector]

^^ I'm getting mine put in this friday ... Shift Kits for all!

[WogBoyz]

lol sweet! mines getting put in as we speak, will post back results

also reflector get them to give ur auto a full service of filters fluid ect before they put the kit in

[WogBoyz]

well got the ute back and man i think i need a neck brace lol it changes so hard from 1st to 2nd crazy but good fun

[pillzor]

wogboyz how much was labour?

[WogBoyz]

wogboyz how much was labour?

well all it cost $450 but my mate did it cheaper, bascially i had my diff serviced, new oil ect same as the auto, then the stage 2 shift kit and corvette servo, they had it just before 9 til around 2ish

comming home i just eaisly made my 18inch rims with good tyres do a nice big chirp lol its sick as

[Reflector]

haha sounds awesome man. Yeah I'm getting a couple of fellas who specialise in auto work to do it for me. They said they wanted to do a full service and everything for me, so yeah, will just have to wait till friday.

Have you tested your revs with the shift kit? Does the limiter kick in?

[WogBoyz]

haha sounds awesome man. Yeah I'm getting a couple of fellas who specialise in auto work to do it for me. They said they wanted to do a full service and everything for me, so yeah, will just have to wait till friday.

Have you tested your revs with the shift kit? Does the limiter kick in?

nah havnt tested them, and yeah good to get a full service, im so not used to it, gunna need a neck brace soon lol