Help guys

[Ryaz11]

Hey guys

checked error codes and got 13 (oxy Sensor)

My car has been rough lately so i want to no if this would be ok to put in it


HOLDEN OXYGEN SENSOR FITS VS VT VU VX VY VZ OXY O2 - eBay Other Engines, Components, Engines, Components, Car Parts, Accessories, Cars, Bikes, Boats. (end time 02-Nov-09 15:46:50 AEDST)


do i need 1 or 2 of these?????

Thanks guys

[The1]

you need to check what yours is using now as vs models can have different sensors, some are 2 wire some 3 some 4 so you need to go check yours to see how many wires yours has first.

[Vee-ard]

v6 needs two, v8 needs one. If you did error codes it should have said left bank or right bank for a v6.

[Ryaz11]

yes it said RH O2 sensor??

i have a vs wagon series 2 so i can only see 1

[-ToM-]

VS has 2 oxy sensors

[Ryaz11]

so if i got 2 of those that are on ebay are they going to be ok to put in?

[The1]

you need to check how many wire yours are, being series 2 most likely 4 wire, but id still check

[Ryaz11]

do you no were i should look??

i found the wire on the passenger side just cant see the other wire?

[The1]

the drivers side sensor is further down the exhaust pipe.

[aceventura]

If your sensors have never been replaced, then it is probably a good thing to do. Being a series II you will need the 4-wire sensor you linked to. However, don't be surprised if you still get a code 13 when you change them. I have had this problem of late, and it is caused by a poor wiring design. See:

When does the car enter closed loop mode

If you do have this problem see, suggested fixes:
How To: Fix the VS V6 4 Wire O2 sensor earth problem – Known Holden Problem

Or:
Ecotec development