keybarrell problems URGENT HELP NEEDED

[mini1200]

hey jst bought a vr commo and the guy lost all the keys so its got
busted arse barrel and no steering lock how do i bypass the bcm so it thinks its got the key
in the ignigtin .... any help greatly appreciated. dnt fill my thread with studip arse comments
ps. the car is not stolen i revs checked it

[hako]

Turn the ignition on (all reds on) and leave it like this for an hour - this bypasses the immobiliser. You can then start the car but need to replace this procedure if you turn it off.

[vsl67]

this thread will probaly get locked like most other ones likes this
But is this car a everyday Driver or something you just want to move ?
I ask because you are going to have to get a new key from Holden and key barrel evently so you have to provide them with a chassis number and proof of ownership

also I can see you are very fond of your VR excutive shitbox

[clubby_you]

If you can get a vn computer just plug it in and off you go as it does not look for the signal from the bcm

[mini1200]

thx for the waste of time vn computer has different pugs found out the hard way ....

any more ideas

[hako]

Read my post #2 again - that's the factory method and is mentioned if the owners handbook. I'm guessing the key barrel is removed and if so you will be able to rotate the actual ignition switch....if you can get reds and leave it for an hour the engine will crank with fuel and ignition.