need link to level 3 cluster conversion cant find it

[sycvs]

as the title says i need the link or name of thread i cant find it cheers guys

[88GreenVN]

tripin.

That will be the one.

[sycvs]

cheers for that

[sycvs]

thats prety hard to follow is there any easyer to follow

[88GreenVN]

in making the looms up - not that I've found. I made a jig up and took a few months to work it all out using a loom that had been made up for me. Takes about an hour to join in all the L3 wires.

Strip a L3 loom and cut the 4th plug out along with the switch block plug where they join into the mail dash loom.

Then solder into your L2 loom.

[sycvs]

i just picked up a 4th plug so do i need more then that

[88GreenVN]

i just picked up a 4th plug so do i need more then that

Yes the switch block plug. Then follow the wire diagram in the tripin thread.

[sycvs]

what does the switchblock look like and could i get away with it

[88GreenVN]

what does the switchblock look like and could i get away with it

The trip computer has 3 modes. With out the switch block your stuck on what ever it was last set to. The switch block is the same fit as the speed alert.

[sycvs]

i never use the trip meter but will the odometer still work with out it

[88GreenVN]

i never use the trip meter but will the odometer still work with out it

Yes the ODO will work without the switch block. You will see the odo reading when the car is turned off. Unless it happens to be on that mode.

[sycvs]

got every thing wired in except switch block what else oes the switch block change on the lcds

[88GreenVN]

got every thing wired in except switch block what else oes the switch block change on the lcds

the 3 screens roll through 3 modes and have a total of 9 readings between them.

The switch block is easy to do. 4 colours to 4th plug, brown white to a brown white and black to a black and you can connect a SB.

[sycvs]

so some plain switches will do it
then