supercharged pacemaker extractors

[seanns]

morning,
i finally got around to fitting my supercharged pacemaker extractors part no: 5059-5060
they guy who i bought them off at the shop says they fit.
ive got every thign appart all the manifolds off and what not but doesnt seem like theres enough room to get them in?
ive tried manouverin them in but cant seem to gte them.
and the off set to the standard engine pipes to the my new pacemakers is a great difference.
can anyone shed me some like on my problem?
help much appreciated asap too if its not too much trouble as the car is apart now.
thanks sean

[Brett_jjj]

Have you undone the steering rack?

[wamboin23]

from what i can see the part number of your headers are for vt-vy, which are different AFAIK, because of the wider body on the vt-vy.

they may fit, have you dropped the steering rack?

http://www.pacemaker.com.au/FittingI.../PH%205039.pdf

these are the fitting instructions for the vs v6 headers - PH 5039

[TrikkBen]

the engine needs to be lifted on one side to get the extractors in on a VR VS

[seanns]

not on the drivers side. cause they dont even fit down the passengers side wheres there plenty of room.
it says htere for vt-vx supercharged. and i measured between the rails on mine and my mates vx the the vs rails are 150mm smaller then the vx, so im guessing the spud at the exhaust joint gave me the wrong ones?
unless you can convince me they are the right ones?
casue they just dont physically fit

[wamboin23]

not on the drivers side. cause they dont even fit down the passengers side wheres there plenty of room.
it says htere for vt-vx supercharged. and i measured between the rails on mine and my mates vx the the vs rails are 150mm smaller then the vx, so im guessing the spud at the exhaust joint gave me the wrong ones?
unless you can convince me they are the right ones?
casue they just dont physically fit

correct. i was 90% sure

yeah there the wrong ones. take them back. you need ph5039

[seanns]

yeah thats what i thought.
what a pain in the arse no i cant do anythign just got to wait til tomorow to go back down see if hes open.

[Scooter79]

Pacemaker don't make extractors specifically for the supercharged VS. There weren't enough supercharged VS's for it to be economically viable, plus the VT and VX have a wider engine bay for clearance. The guy from the exhaust shop should have known better.

Are you dead set on Pacemaker? Genie make some good quality stuff and cheaper as well. You can usually find various brands of suitable headers cheap on ebay. I've seen the Genie ones on ebay for $430.