Hey, I've got a VN commodore as a First car as i am only 16, it has a 3inch exhaust with Extractors, Lowered 2inches with King Springs, limited slip diff and the motor is a Reco and goes very fast together with the HSV ECU put in the car. This is all good and well but i just bought a VR with either a shot Trans or Engine. Its completely stock. So my question is can i put all the exhaust, springs, diff on the car and change the motor and trans from the VN to the VR??
My dad says No because the VN's are slightly different and the motor and shit wouldnt fit, but i thought i would get a second opinion coz i see alot of parts on the internet labeled "VN VP VR VS"
Anyhelp would be greatly appreciated because i have to get rid of one of the cars asap..
Yes can all go in, You will have to use the loom and ecu from the VN, just swap everything in the engine bay and you should be right. Someone in this thread at some point will say "you can't put a older motor in it" so I'll just add a preemptive "bullshit"![]()
Although I will add the fixing the VR with another engine and or box would be easier
all thats different is wiring loom and ecu, with the gearbox its cable change gears and the vr are electronic, easy done go for it son
Vs eco 3.8, extractors, 2.75" exhaust, roller rockers, cammed, bored out 20, t5 manual, rolling on king springs all way round with monroe gt shocks all way round, every door has a ding but looks can be very deceaving
Is it a Series 1 or 2 VN? You should check if there are stricter exhaust emmissions on a VR compared to a VN if there are then you could be defected if someone checks the engine number.
Also would the instrument cluster still work ok?
if the VR has IRS then no the springs will not fit, because afaik VNs never came in IRS
but if the vr isnt IRS.. im still not sure if they would, anyone else care to enlighten?
and the diff yes you can im sure.
Or you could bang a red 308 in it. Same difference.
irs will not fit period
yes completely the same with suspension wise in the back end, front end is different, as the top struts of ure shocks in the vr has like 8 bolts or something and the vn-vp has 3 bolts, springs would fit the front shocks though if you can change them over by yourself? just keep the front shocks original.\
brakes are the same, evan for abs as that is in your hub, there is a sensor
Vs eco 3.8, extractors, 2.75" exhaust, roller rockers, cammed, bored out 20, t5 manual, rolling on king springs all way round with monroe gt shocks all way round, every door has a ding but looks can be very deceaving
VN diff will fit into VR but is skinnier and looks stupid.
motor and trans should be all sweet but suspension u will have to find out coz some vn's are different
Hey thanks everyone for the help. i found out that i would need to change the Loom in order to change over the motor.. ive opted not to buy the VR and just keep the VN as is..
Seemed like a good idea at the time :P
once again thank you all!