Hi just bought a VS commodore very happy with it besides the fact when sitting at the lights it will shudder and feel real notchy until you lift your foot of the brake and go agian and its fine. The auto dosent slip at all, and change gears smoothly, If any one will know what causes this help would be greatly appreciated Cheers Cam
sounds like your brake booster, or you need to reset your ecu so it might set the idle, what revs is this doin when your at lights?
Vs eco 3.8, extractors, 2.75" exhaust, roller rockers, cammed, bored out 20, t5 manual, rolling on king springs all way round with monroe gt shocks all way round, every door has a ding but looks can be very deceaving
revs at bout 500 with my foot on the brake
The brake booster is probably stuffed and letting air get in past its seals or valves,which will make the engine run rough because the brake booster uses vacuum from the engine to work.Hows the brake pedal feel to push in,hard or normal?
Nah Brakes are fine dosent lose pressure at all feels like normal commodore brakes
try reseting the ecu
best way for this is to disconnect the main 60 amp fuse which is 2x10mm botls holding it in, and of course disconecting the battery as well
but others say just leave the battery off for 5 mins does the same, but up to you, just give that a try, and if thats not it, its your brake booster
Vs eco 3.8, extractors, 2.75" exhaust, roller rockers, cammed, bored out 20, t5 manual, rolling on king springs all way round with monroe gt shocks all way round, every door has a ding but looks can be very deceaving
thanks for the help guys ended up been one engine mount and the transmission mount cause every thing to rattle and shake cheers cam