Hi When the driver side electric window is moving up it comes away from the piller if I push it backwards it will still leave a gap when fully up by placing both hands one out one inside I can rock the window. this is the only way I can get to close up and not make wind noise when driving. Is it easy to replace the control arms in the door??
Sean
holden dont make them anymore but you can buy aftermarket mechanisms off ebay. The factory ones on the car are rivited on you will need to drill the rivets out to get the old one out, then just use some bolts with spring washers to put the new one in.
yeah mate its easy as providing you have the right tools i just converted my arms from electric to manual in my vs statesman and its easy as just make sure the window goes back in the window guides and wouldnt hurt to put some grease on the arms were it looks like its needed
My vz ssz ute
THOSE WHO CRITICIZE OUR GENERATION FORGET WHO RAISED IT
Hi The1,
Any leads on an ebay listing please? I've had a look and cant find anything. Thanks heaps.
Matt
VSII V6 Berlina Wagon, Auto
VY SS Crewman Ute, Auto
They can be hard to find can't they. The drivers window is always the one to go, so they become hard to find
http://shoppingsecure.com.au/ - JC's Rep
PM me or email philthy@shoppingsecure.com.au for all your stereo needs
Hi The1,
Ha! I was missing the vital "regulator" piece of information!
Cheers, Matt.
VSII V6 Berlina Wagon, Auto
VY SS Crewman Ute, Auto
Take you door card off and have a look. You might find that one or more of the rivets holding the actuator in place have let go (common problem) and just need replacing rather than requiring new arms.