K frame help plz

[bubba6]

Hey all ... i have 2 vr irs commies 1 is v6 n 1 is v8 Can i unbolt the k frame out of the v8 n bolt the front n back frames into the v6 body? or could i swap everything from my v8 irs into the v6 irs frame does it fit? ... any help thank you in advance ... Cheers Bubbs

[bandit10]

yes it will all fit, so long as you use the V8 engine with the V8 k-frame and V6 k-frame with v6 engine you can bolt it up to either one

[bubba6]

Thanx for that info bandit 10 didnt think the factory would have changed from one to the other , just wanted to be sure , so asked the experts , is there anything i would have trouble with , such as the loom or the body module(i know there will be some wiring issuses)but any major that anyone has run into , would appreciate any heads up you could offer , once again Cheers Bubbs

[iwannabusa]

gotta luv the komy's aye vc to vs it is all interchangable, holden 6(202) and v8 is all the same was just the buick v6 and the nissan 6 that is different and the vr vs struts...
v8 body control modules in the vr vs are the same part number as v6 not sure about wiring loom tho sorry

[bandit10]

If there both VR's then the wiring will plug right in, only difference with the VS is the engine loom plugs in further up the drivers side near the screen instead of plugging in at the fuse box near battery like the VR does.

[bubba6]

Hey thanx again fellas , have a sqizz on vr/vs thread (its under 93 supercharged v8 berlina) theres sum pics up will put more of the build up as they come Cheers Bubbs