VR V6 Manual Lukey Extractors

[dj_gardner007]

Hey, just fitted a set of Lukeys to my vr v6 manual.

I found that the driver's side was a complete b*****d to get the old headers off and the new ones in.

What I did was:
- Dropped the steering rack and column out of the way
- Unhooked the clutch cable
- unbolted the engine mounts from the k-frame/crossmember
- jacked the motor up so there's enough room to remove the old header and put the new Lukey one in
- bolt everything back up.

Thought I'd post this in case anyone else is having trouble.
Cheers,
Dave

[Not_An_Abba_Fan]

Usually there is no need to jack the engine up unless the mounts are very sagged.