automatic box, hessitation

[202injected]

i have tried searching the forum, but couldn't find the info i am looking for.

I have a v6 vr exec with auto, when i put the sucker into drive, it takes ages for the gear to acctually engage, does anyone know what the cause of this is, before i pull the box apart to have a look

i have recently put a minor service kit in the bock while i was rebuilding the engine, the shift issue was there before the engine was out.

i just wanna know what parts i need before i pull the box out again really

[hako]

It's normal to have a slight delay when going from N to D....it is actually mentioned in the owners handbook. When it takes longer than 3 seconds I would start to worry as it usually indicates the clutches etc are very worn and the box needs a full overhaul. There are some good sites which explain full teardown procedures for the 4L60E box....check on GOOGLE.
Good Luck.

[vr1uz-fe]

have you scanned the box if any fualt codes come up you may have to pull it apart

tools you will need

screw driver flat and philp's
shifta big and small
hammer or as i reffer to it bang stick
maby some pliers to
oh and a super cheap socket set