94 VR Stereo Wiring

[BigMoose]

Hi All. First time poster here. I just bought a VR commo and it had a kenwood head HU in it but it was old and not functioning as it should. Anyways, I pulled that out to replace it with my Pioneer and I did the stupidest thing I could of done... I cut the wires from the back of the kenwood without looking at or labelling what wire went where I have browsed through the audio section and everyone that has posted doesn't seem to have the same colour wiring as I do. I can kind of gather that the wires that have the same colour except for the black line, are speaker wires (im not really worried about them I can figure them out no problem), my problem is, I cannot for the life of me find the power! I don't have one of those voltmeter thingos (that look like a small screwdriver) but I have a black/white wire (im assuming this is the earth), an orange and purple wire (??) a stray grey, a stray beige, a red, and a yellow. I have tried every possible combo (I think?) but I just cannot get the damn thing to power up. HELP ME!!!

[jonboy]

im pretty sure yellow is main power, and orange is acc, either beige or grey is airial or lighting. i cant remember exactly tho

[wamboin23]

12v battery supply is orange purple.

check your fuses if your not getting power.

http://www.justcommodores.com.au/temp/wiring.htm - look here, only difference is the constant 12v - it changed to orange purple around VR i think.

[vr1uz-fe]

the three mains are balck earth yellow ing red battery

for speakers you can use a 9volt battery and spark it on the wires to hear were they are the speakers are usaly the same couler but one has a black line

oh yea it dose take a while to wire them up properly as i have done a few

[BigMoose]

Thanks guys got it all sorted thanks to your help. Cheers!