Haynes Manual....

[deXtrous]

Hey folks. In what part of the Haynes manual state how to screw your front quarter panels back on? I took mine off a while ago to paint and cant remember which screws go where.

Cheers

[seq4x4]

Umm at a guess, pained one in the engine bay, dirty ones on the bottom? I havent had to remove yet. Get all your panel bolts together, see if theres any differences. Then check the thread holes or even test putting them in.

[deXtrous]

Yeha problem is I took my bonnet, bumper, and two quarters off a while ago and I can't remember all the bolt locations... Thought haynes manual would have it

[seq4x4]

Give me a couple of mines. Iv got my front bar and headlights out currently. Prepare to be bombarded with pictures.

[seq4x4]

8 of the first pic, 4 each guard.
2 of the second pic, guards towards bonnet hinges.
2 of 3rd pic. under the guard towards the headlights
2 of forth pic, guard, under the sill at the front doors
2 each side, fifth and sixth picture. access whilst the door is open.

The only 2 metal threads are for the guard are to go near the head light.
Also forgot about the 2 nuts under the bonnet struts for the guards.
Thats it for the guards

the remaining 4 bolts should be for the bonnet.








Hope this helps.

[soop]

It shouldn't matter. They're all the same thread.

[seq4x4]

All but 6 bolts are. 6 of them are metal threads, the rest are self tappers.

[soop]

Should be fairly clear were the self tappers go.