Hi all,
Where do I buy aftermarket VS door actuators in brisbane?
I`ve only tried REPCO so far.
"Success is the ability to go from one failure to another with no loss of enthusiasm" Sir Winston Churchill.
My VS II Berlina Wagon
MY12 II SV6 Sportwagon
you can fit standard universal aftermarket one in.
just need to modify the wiring, and possibly the linkage, but its been awhile since I've done one.
Just buy a set of them at JB or Strathfield car radios (or the equivalent). How many are you needing, I might have one or two genuine or aftermarket ones.
Thanks guys.
tezza 2 for the back doors how much?
"Success is the ability to go from one failure to another with no loss of enthusiasm" Sir Winston Churchill.
My VS II Berlina Wagon
MY12 II SV6 Sportwagon
G'DaY Peter, Just my opinion, but I wouldn't go for aftermarket clamp in solenoid/actuators for 2 reasons: first is they are difficult to fit securely in the rear door with the snib a long way from the lock and secondly they are not waterproof and once water gets in them they fail.
Have you tried to get the old ones going? ---WD40 etc....they rarely fail in a terminal fashion
"If anyone disagrees with anything I say, I am quite prepared not only to retract it, but also to deny under oath that I ever said it." --T. Lehrer
"The secret of success is sincerity. Once you can fake that you've got it made." -- Jean Giraudoux
not yet hako I think it just needs a clean.
I think the rain has got to it.
"Success is the ability to go from one failure to another with no loss of enthusiasm" Sir Winston Churchill.
My VS II Berlina Wagon
MY12 II SV6 Sportwagon
Yup - we're wet up here in the clouds as well. I fitted 4 X aftermarket actuators to my daughters Laser - they lasted 12 months till the rubber boots fell apart and water got in. The factory ones are much beteer designed so I'd go the WD40 route first and save $$$$. Good Luck.
"If anyone disagrees with anything I say, I am quite prepared not only to retract it, but also to deny under oath that I ever said it." --T. Lehrer
"The secret of success is sincerity. Once you can fake that you've got it made." -- Jean Giraudoux
Im sure Ive fitted aftermarket acuators to the rear door of a VS wagon and it bolted up fine to the existing holes. Just had to change the wiring.
I would definately go genuine items on my car though.
If u can get them.
Rain i think
worked to day didn`t worked this avro
Last edited by VS_Pete_1; 14-10-2010 at 06:04 AM.
"Success is the ability to go from one failure to another with no loss of enthusiasm" Sir Winston Churchill.
My VS II Berlina Wagon
MY12 II SV6 Sportwagon
After abit of sunshine the actuator has dried out and is working ok.
"Success is the ability to go from one failure to another with no loss of enthusiasm" Sir Winston Churchill.
My VS II Berlina Wagon
MY12 II SV6 Sportwagon