Results 1 to 15 of 15

Thread: Stage 2 shift kit

  1. #1
    Patti2912's Avatar
    Patti2912 is offline P4TT1
    Ride
    93 VR S Commodore

    Join Date
    Jul 2010
    Location
    St. Kilda
    Posts
    207

    Default Stage 2 shift kit

    So after a bit of thinking and research, i am PRETTY sure i've decided to install a stage 2 shift kit,
    Prior to this though i am after some last minute advice, hints, tips and so forth from anyone that currently has a vehicle with this, or has owned one.
    Advantages, disadvantages, annoyances and so forth,
    And if anyone thinks they are horrible and wants to turn me against them for whatever reason then please give it a shot before i make a mistake in getting one.

    Also, rough prices and locations/recommendations as to where is best to get this done.

    Would really appreciate some feedback, cheers!
    Quote Originally Posted by Morton View Post
    You're better off using a 175g can of Masterfoods Wholegrain Mustard. I just measured that, and it's 9.5cm tall. Keep one in your car at all times, and if a police officer tries the "coke can test", you can tell him what I told you

  2. #2
    ephect's Avatar
    ephect is offline Donating Member
    Ride
    VS Acclaim V6

    Join Date
    Jul 2006
    Location
    Melbourne
    Posts
    3,271

    Default

    they are a decent bit of kit, and there is a heap of threads with feedback and comments..

    here click this link http://forums.justcommodores.com.au/...ne-3.html#1076

    stage 2 shift kit
    stage 2 shift kit VR
    Transgo Stage 2 shift kit
    Stage 2 shift kit

    should keep you busy
    ------------------------------------------------------
    ------------------------------------------------------

    Quote Originally Posted by JEZIMP View Post
    jsut quickly, wat is a ffs search, ive seen it a fair bit and not sure wat it is, so some help would b greatly appreciated on where and how to do it, thankz
    Quote Originally Posted by vcstarfirequeen View Post
    its a 5 stud and u couldnt just weld a new stud on youd have to weld 5 new ones on i may be blonde but im not dumb

    Wanted: VR/VS Standard Rear Bumper Bar - Can be damaged - PM me if you have one

  3. #3
    wraith's Avatar
    wraith is offline Hand over the dog bikkies
    Ride
    '95 VR Series II

    Join Date
    Sep 2008
    Location
    Demonicaland
    Posts
    3,097

    Default

    Another option is to get the line pressures bumped up and go from there.
    Welcome to the internet where people have opinions that you might not like




  4. #4
    Patti2912's Avatar
    Patti2912 is offline P4TT1
    Ride
    93 VR S Commodore

    Join Date
    Jul 2010
    Location
    St. Kilda
    Posts
    207

    Default

    Quote Originally Posted by ephect View Post
    they are a decent bit of kit, and there is a heap of threads with feedback and comments..

    here click this link http://forums.justcommodores.com.au/...ne-3.html#1076

    stage 2 shift kit
    stage 2 shift kit VR
    Transgo Stage 2 shift kit
    Stage 2 shift kit

    should keep you busy
    Ah thanks mate, killer!
    Quote Originally Posted by Morton View Post
    You're better off using a 175g can of Masterfoods Wholegrain Mustard. I just measured that, and it's 9.5cm tall. Keep one in your car at all times, and if a police officer tries the "coke can test", you can tell him what I told you

  5. #5
    Patti2912's Avatar
    Patti2912 is offline P4TT1
    Ride
    93 VR S Commodore

    Join Date
    Jul 2010
    Location
    St. Kilda
    Posts
    207

    Default

    Looks like a stage 2 Transgo shift kit is what im after guys,
    Again, thanks 'ephect' for those links, they were a massive help.

    Now lastly, do i just simply buy a 'transgo stage 2 shift kit' off ebay and take it to a mechanic, or is it not that simple?
    Quote Originally Posted by Morton View Post
    You're better off using a 175g can of Masterfoods Wholegrain Mustard. I just measured that, and it's 9.5cm tall. Keep one in your car at all times, and if a police officer tries the "coke can test", you can tell him what I told you

  6. #6
    ephect's Avatar
    ephect is offline Donating Member
    Ride
    VS Acclaim V6

    Join Date
    Jul 2006
    Location
    Melbourne
    Posts
    3,271

    Default

    yea thats pretty much it, the transge stage 2 doesnt come with the 2nd gear corvette servo, so you have to purchase this seperately. i have a transgo kit (not installed yet) but have the 2nd gear corvette servo in and the change from 1st to 2nd is nice, firm, and quick when the foots down, and barely noticeable when on light throttle.

    your best off ringing around to get quotes off some automatic specialists as some/most mechanics wont touch or service your auto. it wont hurt getting your auto serviced at the same time (most will do this).

    Make sure when its done, post up your results
    Last edited by ephect; 03-11-2010 at 11:27 AM.
    ------------------------------------------------------
    ------------------------------------------------------

    Quote Originally Posted by JEZIMP View Post
    jsut quickly, wat is a ffs search, ive seen it a fair bit and not sure wat it is, so some help would b greatly appreciated on where and how to do it, thankz
    Quote Originally Posted by vcstarfirequeen View Post
    its a 5 stud and u couldnt just weld a new stud on youd have to weld 5 new ones on i may be blonde but im not dumb

    Wanted: VR/VS Standard Rear Bumper Bar - Can be damaged - PM me if you have one

  7. #7
    Patti2912's Avatar
    Patti2912 is offline P4TT1
    Ride
    93 VR S Commodore

    Join Date
    Jul 2010
    Location
    St. Kilda
    Posts
    207

    Default

    Quote Originally Posted by ephect View Post
    yea thats pretty much it, the transge stage 2 doesnt come with the 2nd gear corvette servo, so you have to purchase this seperately. i have a transgo kit (not installed yet) but have the 2nd gear corvette servo in and the change from 1st to 2nd is nice, firm, and quick when the foots down, and barely noticeable when on light throttle.

    your best off ringing around to get quotes off some automatic specialists as some/most mechanics wont touch or service your auto. it wont hurt getting your auto serviced at the same time (most will do this).

    Make sure when its done, post up your results
    I definitely will man.
    I saw on some of the other posts that some places do the complete install for whatever set price it is,
    Is this mainly at performance mechanics?
    Wouldn't mind a 'drive in drive out' kinda thing.
    Quote Originally Posted by Morton View Post
    You're better off using a 175g can of Masterfoods Wholegrain Mustard. I just measured that, and it's 9.5cm tall. Keep one in your car at all times, and if a police officer tries the "coke can test", you can tell him what I told you

  8. #8
    ephect's Avatar
    ephect is offline Donating Member
    Ride
    VS Acclaim V6

    Join Date
    Jul 2006
    Location
    Melbourne
    Posts
    3,271

    Default

    not 100% sure, depending on the work load of some joints, it may take half a day or it may take them 2.
    There are mechanics, mechanics that will do your auto, and auto specialists that know their way round an auto with their eyes closed. Which ever you call, ask them about install times, when, where only they can tell you. i dont know of any to recommend sorry.

    As i had my servo installed when i got my auto rebuilt, but didnt install the transgo kit at the same time because he wouldnt give the 2 year warranty as he didnt deal much with shiftkits.
    ------------------------------------------------------
    ------------------------------------------------------

    Quote Originally Posted by JEZIMP View Post
    jsut quickly, wat is a ffs search, ive seen it a fair bit and not sure wat it is, so some help would b greatly appreciated on where and how to do it, thankz
    Quote Originally Posted by vcstarfirequeen View Post
    its a 5 stud and u couldnt just weld a new stud on youd have to weld 5 new ones on i may be blonde but im not dumb

    Wanted: VR/VS Standard Rear Bumper Bar - Can be damaged - PM me if you have one

  9. #9
    HamaTime™'s Avatar
    HamaTime™ is offline VIP Member
    Ride
    97 - VS S
    Operation Tiger Champion! Marble Mayhem Champion! Spacerunner 2 Champion! Triathlon Champion!
    Join Date
    Feb 2008
    Location
    Melbourne
    Posts
    1,541

    Default

    I got mine done for $330 at Bayswater Automatics. Full Stage 2 with corvette servo's. Drive in, Drive out. Takes about 3 and a bit hours. I just went and chilled at Maccas and fell asleep while waiting lol.
    1997 VS II - S

    Stage II Auto: Pacemakers & 2.25 Hi Flo: VT Brakes: Lowered: Spaced & Insulated




  10. #10
    Patti2912's Avatar
    Patti2912 is offline P4TT1
    Ride
    93 VR S Commodore

    Join Date
    Jul 2010
    Location
    St. Kilda
    Posts
    207

    Default

    Quote Originally Posted by ephect View Post
    not 100% sure, depending on the work load of some joints, it may take half a day or it may take them 2.
    There are mechanics, mechanics that will do your auto, and auto specialists that know their way round an auto with their eyes closed. Which ever you call, ask them about install times, when, where only they can tell you. i dont know of any to recommend sorry.

    As i had my servo installed when i got my auto rebuilt, but didnt install the transgo kit at the same time because he wouldnt give the 2 year warranty as he didnt deal much with shiftkits.
    Fair call.
    Ill look into it mate and hopefully it won't be too much of a hassle to find someone to do it smoothly.

    Cheers for the help bro.
    Quote Originally Posted by Morton View Post
    You're better off using a 175g can of Masterfoods Wholegrain Mustard. I just measured that, and it's 9.5cm tall. Keep one in your car at all times, and if a police officer tries the "coke can test", you can tell him what I told you

  11. #11
    dumpedvs's Avatar
    dumpedvs is offline sheppa8
    Ride
    Vx S

    Join Date
    Mar 2010
    Location
    geelong
    Posts
    128

    Default

    Deffiantly worth getting one man,
    Ive got one in my vs, shifts so much better
    I reject your reality and substitute my own.

  12. #12
    Patti2912's Avatar
    Patti2912 is offline P4TT1
    Ride
    93 VR S Commodore

    Join Date
    Jul 2010
    Location
    St. Kilda
    Posts
    207

    Default

    Quote Originally Posted by sheppa8 View Post
    Deffiantly worth getting one man,
    Ive got one in my vs, shifts so much better
    Oh yeah?
    Thats always good to hear man.
    How did you go getting it installed and everything?
    I'm really confused about how im going to go about it to be honest, at the risk of sounding naive.
    Quote Originally Posted by Morton View Post
    You're better off using a 175g can of Masterfoods Wholegrain Mustard. I just measured that, and it's 9.5cm tall. Keep one in your car at all times, and if a police officer tries the "coke can test", you can tell him what I told you

  13. #13
    ephect's Avatar
    ephect is offline Donating Member
    Ride
    VS Acclaim V6

    Join Date
    Jul 2006
    Location
    Melbourne
    Posts
    3,271

    Default

    Quote Originally Posted by HamaTime View Post
    I got mine done for $330 at Bayswater Automatics. Full Stage 2 with corvette servo's. Drive in, Drive out. Takes about 3 and a bit hours. I just went and chilled at Maccas and fell asleep while waiting lol.
    was that just install or supply and install?
    ------------------------------------------------------
    ------------------------------------------------------

    Quote Originally Posted by JEZIMP View Post
    jsut quickly, wat is a ffs search, ive seen it a fair bit and not sure wat it is, so some help would b greatly appreciated on where and how to do it, thankz
    Quote Originally Posted by vcstarfirequeen View Post
    its a 5 stud and u couldnt just weld a new stud on youd have to weld 5 new ones on i may be blonde but im not dumb

    Wanted: VR/VS Standard Rear Bumper Bar - Can be damaged - PM me if you have one

  14. #14
    Ride
    vs commodore

    Join Date
    Oct 2009
    Location
    Tamworth NSW
    Posts
    4,507

    Default

    Just changing a few values in the auto transmission settings in the memcal chip can make these boxes change 100 times better than standard too, and costs nothing if you have access to EPROM read/write gear.Ive tried a few different transmission settings,small changes, a bit at a time,slowly I got it better, and now, no more laggy,slow shifts.Just quick, snappy shifts under power,and firm, quick shifts under light throttle..This is from a standard VS box thats got about 150,000 km on it,and has been serviced regularly.It will be interesting to see how it goes over time.I dont drive slowly either...but so far,so good.Ive noticed that the box runs a bit cooler around town with these settings too.Thats gotta be a good thing.

  15. #15
    Patti2912's Avatar
    Patti2912 is offline P4TT1
    Ride
    93 VR S Commodore

    Join Date
    Jul 2010
    Location
    St. Kilda
    Posts
    207

    Default

    Quote Originally Posted by HamaTime View Post
    I got mine done for $330 at Bayswater Automatics. Full Stage 2 with corvette servo's. Drive in, Drive out. Takes about 3 and a bit hours. I just went and chilled at Maccas and fell asleep while waiting lol.
    I didn't even see this reply, this sounds like something i want man,
    How did it turn out?
    I especially dig the nap whilst waiting part haha.
    Quote Originally Posted by Morton View Post
    You're better off using a 175g can of Masterfoods Wholegrain Mustard. I just measured that, and it's 9.5cm tall. Keep one in your car at all times, and if a police officer tries the "coke can test", you can tell him what I told you

LinkBacks (?)


Similar Threads

  1. Stage 2 shift kit
    By W8INL9 in forum VR - VS Holden Commodore (1993 - 1997)
    Replies: 11
    Last Post: 19-08-2010, 01:58 PM
  2. Stage 2 Shift Kit
    By RazzaCaine in forum VR - VS Holden Commodore (1993 - 1997)
    Replies: 0
    Last Post: 11-05-2010, 11:46 PM
  3. Stage 2 or Stage 3 shift kit?.....can someone just quickly explain
    By S2_VR_ in forum VR - VS Holden Commodore (1993 - 1997)
    Replies: 16
    Last Post: 03-07-2009, 03:25 AM
  4. stage 2 shift kit?
    By Sabby in forum VL Holden Commodore (1986 - 1988)
    Replies: 13
    Last Post: 02-01-2007, 12:13 PM
  5. wtb: stage 2 shift kit
    By UNEQVN in forum Swap / Wanted to Buy / Trade
    Replies: 0
    Last Post: 27-06-2005, 08:59 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72