hey has anyone got a mace enginering memcal in teh vs commodore v6?
wanting to get one but just want peoples feedback
greenfoams tune dnt like me vs lol waiting to see wen delcowizzard can do one but wanting to experiment with different ones
sooo yeh r they any good?
cars a VS commodore 1996 series 2 with 141 000 on the clock
i got:
-CAI
-high flow filter
-pacemaker extractors
-2 and half inch exhaust
-plenum spacer
-corvette servo
-soon to be stage 2 shift kit
later down the rack i want to get high ratio rockers
`thanks
kept pinging, hes tunes are really good but my car is just retarded lol (few mates have his tune and no problems)
i changed plugs to cooler ones fuel fiter used high octane fuel sent it back a few times, i gave up in the end lol, im in no way saying foamys tunes are crap or bad, thre really good tunes but it jist wasnt right for my vs, could be somthing else wrong with me car dunno.
Maybe theres something wrong with the memcal itself,it does happen from time to time,I do my own tunes for my VSV6 ,and Ive got the timing wound up a fair way compared to standard,and it still doesnt detect ping or knock unless its flat to the floor in a higher gear etc,when its freely reving through the gears theres bugger all pinging or knock detected.And when it does detect a certain amount of knock via the knock sensors,the ECU will instantly read from a different timing table called the low octane timing table, which obviously has lower timing values than the high octane or normal timing map.If you can actually hear the engine pinging/knocking,then theres something very wrong.The knock sensors should detect the knock or pinging, and deal with it instantly via the ECU, long before the pinging would usually be heard..Also maybe the knock sensors are not working properly.They screw into the water jackets on each side of the block,so it might need a good flush out too as it can fill up with mud and crap.They definitely would be worth checking if you have this problem happen again once another memcal is fitted.
Last edited by Brett_jjj; 04-01-2011 at 12:12 AM.
Are you sure it's pinging? What sort of fuel are you running?
Welcome to the internet where people have opinions that you might not like
cheers for that, will have to check that, its been over a year since i got the tune from grrenfoam lol but useing stock memcal atm. yeh he said the same about it should detect the ping and adjust biut it never did, it pinged around the 2500-3000rpm mark pretty bad (sounded extreamly bad)
do you have a k&n type oiled filter on the intake? give your MAF a good clean. if it is dirty it doesn't read right, a tune with some extra timing in it may very well make it ping.
a vacuum leak through the climate air system can stuff up the tune as well
Body by Holden, Soul by Brock
the Legend will live forever
VN exec T5: 15.1sec @92.2mph 1/4 mile, 9.7sec @ 74.6mph 1/8mile, 2.3sec 60ft, 0-60mph 6.827sec 22/11/07 Gtech competition
What spacer is it? Depending on what's being changed in the tune it can upset the fuel trims quiet a bit. I have been working on a tune for this myself of late. Could give you one to try if your interested.
I have had both greenfoam and mace's memcals and loved them both.
Maces feels a bit more refined, whereas greenfoams was quicker 0-100.
http://shoppingsecure.com.au/ - JC's Rep
PM me or email philthy@shoppingsecure.com.au for all your stereo needs