Removal of vs headlight assembly

[Skrewdriver]

just bought a vs commodore (no workshop manual!),but to get a RWC,i've gotta fix the park lamps (pass. side).
Sussed it out and theres no bulb/light/wedge holder and the wires (green &black?) have been cut back so that you can see them,but cant qiute grab them.
Have been trying to take headlight assembly out but must have missed something.Is there a trick or do i have take the whole front off?
Rear one is out as well,bulbs fine,but if the front is reconnected,would that complete a circuit and enable the rear to work?
i know theres gotta be an easy way to do it,any thoughts?

[Coast_Calais]

just bought a vs commodore (no workshop manual!),but to get a RWC,i've gotta fix the park lamps (pass. side).
Sussed it out and theres no bulb/light/wedge holder and the wires (green &black?) have been cut back so that you can see them,but cant qiute grab them.
Have been trying to take headlight assembly out but must have missed something.Is there a trick or do i have take the whole front off?
Rear one is out as well,bulbs fine,but if the front is reconnected,would that complete a circuit and enable the rear to work?
i know theres gotta be an easy way to do it,any thoughts?

Front bar has to come off, there are two bolts below your headlight that need to come out...
Your rear is not related to your front, so check that one out..

[Skrewdriver]

thanks for the reply mate,i'll have a crack at it when ive got some time

[White Tiger]

here this may help i found it in a thread somewhere around here when i had to remove my headlight cause it was stuffed

[Skrewdriver]

Thanks for piccie White Tiger,thats exactly what i'm after.It'll save a lot of frustration!! good on ya

[Skrewdriver]

it worked a treat,now for a rwc then rego,should be no worries now