Okay.
Central locking; My Back doors unlock, but will not lock. - They attempt to lock but dont succeed.
Amp; Where should I mount it in the back?
Pwr/Econ button; Since installing amp ( I took my whole dash board and etc out, Drivers kickpanel and all the sideskirt things to hide wires), Ive noticed I dont have my PWR button, I thought it might been a blown bulb in the cluster, but Ive driven it with power button on and off and there is no difference, I knew the difference when it used to work. -ive checked my fuses, Ive checked the plug and connection it all looks good.
Any help will be appreciated, thanks.
Try lube the slides and buttons etc on the locking.
had same problem with my lock the #### up after time due to no getting opened and closed all the time i tryed cleaning and lubeing it work for a while then started doing the same thing and after a while it wouldnt even unlock so i went out and got a new motor for the lock
i know my passenger side doesnt always lock due to the red tab. as a test, remove the red tab then try unlocking and locking the doors, if they work fine, replace the tabs.
amp: some ppl mount them upside down on the underside of parcel shelf, personally mount them on the back of the subbox if you have them, or make a U-shaped tray that bolts to the parcel shelf and mount the amps on that so they side the right way up.
Power button: im guessing a loose connection, where im not too sure. did you happen to cut any wires?
I dont think It's a tab problem, I was sitting in my back seat watching them, and they shake a little, tho after unlocking and locking the central locking they all decided to work; What would that mean?
Hm, so know problems with sub being so close to amp? Heard of not to put phones and stuff near a speaker because of the magnet :\ I might put in on my subbox then
Only wires I did cutting on was from the wiring kit for my amp apart from that, no.
Thanks for your inputs (: